The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
FC-PACO-RM: A Parallel Method for Service Composition Optimal-Selection in Cloud Manufacturing System
Abstract
In order to realize the full-scale sharing, free circulation and transaction, and on-demand-use of manufacturing resource and capabilities in modern enterprise systems (ES), Cloud manufacturing (CMfg) as a new service-oriented manufacturing paradigm has been proposed recently. Compared with cloud computing, the services that are managed in CMfg include not only computational and software resource and capability service, but also various manufacturing resources and capability service. These various dynamic services make ES more powerful and to be a higher-level extension of traditional services. Thus, as a key issue for the implementation of CMfg-based ES, service composition optimal-selection (SCOS) is becoming very important. SCOS is a typical NP-hard problem with the characteristics of dynamic and uncertainty. Solving large scale SCOS problem with numerous constraints in CMfg by using the traditional methods might be inefficient. To overcome this shortcoming, the formulation of SCOS in CMfg with multiple objectives and constraints is investigated first, and then a novel parallel intelligent algorithm, namely full connection based parallel adaptive chaos optimization with reflex migration (FC-PACO-RM) is developed. In the algorithm, roulette wheel selection and adaptive chaos optimization are introduced for search purpose, while full-connection parallelization in island model and new reflex migration way are also developed for efficient decision. To validate the performance of FC-PACO-RM, comparisons with 3 serial algorithms and 7 typical parallel methods are conducted in three typical cases. The results demonstrate the effectiveness of the proposed method for addressing complex SCOS in CMfg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From cloud computing to cloud manufacturing
Xu, X. (2012) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2011.07.002 · Cited by 1,780
Performance Analysis of Cloud Computing Services for Many-Tasks Scientific Computing
Iosup, A., Ostermann, S., Yigitbasi, M. N., Prodan, R., Fahringer, T., & Epema, D. H. J. (2011) · IEEE Transactions on Parallel and Distributed Systems · doi:10.1109/tpds.2011.66 · Cited by 867
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574
Self-citationTQoS: Transactional and QoS-Aware Selection Algorithm for Automatic Web Service Composition
El Hadad, J., Manouvrier, M., & Rukoz, M. (2010) · IEEE Transactions on Services Computing · doi:10.1109/tsc.2010.5 · Cited by 314
Tao, F., Zhao, D., Hu, Y., & Zhou, Z. (2008) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2008.2009533 · Cited by 273
Self-citationBusiness Intelligence for Enterprise Systems: A Survey
Duan, L., & Xu, L. D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2188804 · Cited by 254
Self-citationAutoAssem: An Automated Assembly Planning System for Complex Products
Xu, L. D., Wang, C., Bi, Z., & Yu, J. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2188901 · Cited by 215
Self-citationEffective Web Service Composition in Diverse and Large-Scale Service Networks
Oh, S.-C., Lee, D., & Kumara, S. R. T. (2008) · IEEE Transactions on Services Computing · doi:10.1109/tsc.2008.1 · Cited by 178
Further discussion on cloud manufacturing
Li, Z., & Cnr, C. (2011) · Cited by 149
Composition of Semantic Web services using Linear Logic theorem proving
Rao, J., Küngas, P., & Matskin, M. (2005) · Information Systems · doi:10.1016/j.is.2005.02.005 · Cited by 148
Cited by
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172
Industry 4.0: state of the art and future trends
Xu, L. D., Xu, E. L., & Li, L. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1444806 · Cited by 3,221
Self-citationDigital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Self-citationCCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System
Tao, F., Cheng, Y., Xu, L. D., Zhang, L., & Li, B. H. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306383 · Cited by 722
Self-citationIoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing
Tao, F., Zuo, Y., Xu, L. D., & Zhang, L. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306397 · Cited by 587
Self-citation
Metadata
- Authors
- Tao, F., LaiLi, Y., Xu, L., & Zhang, L.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2013-11
- Volume
- 9
- Issue
- 4
- Pages
- 2023-2033
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2085495361
- Cited by
- 362
- References
- 22
- FWCI
- 82.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: FC-PACO-RM: A Parallel Method for Service Composition Optimal-Selection in Cloud Manufacturing System. https://app.cochat.ai/papers/10.1109/tii.2012.2232936
- The paper
- Tao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013). FC-PACO-RM: A Parallel Method for Service Composition Optimal-Selection in Cloud Manufacturing System. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2012.2232936
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.