The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Multiscale Kernel Based Residual Convolutional Neural Network for Motor Fault Diagnosis Under Nonstationary Conditions
Abstract
Motor fault diagnosis is imperative to enhance the reliability and security of industrial systems. However, since motors are often operated under nonstationary conditions, the high complexity of vibration signals raises notable difficulties for fault diagnosis. Therefore, considering the special physical characteristics of motor signals under nonstationary conditions, in this article, we propose a multiscale kernel based residual convolutional neural network (CNN) for motor fault diagnosis. Our contributions mainly fall into two aspects. First, we notice that each motor fault category has various patterns in vibration signals due to the changing operational conditions of the motor. To capture these patterns, a multiscale kernel algorithm is applied in the CNN architecture. Second, since the motor vibration signals are made up of many different components from different transfer paths, they are very complex and variable. To enable the architecture to extract fault features from deep and hierarchical representation spaces, sufficient depth of the network is needed, which will lead to the degradation problem. In the proposed method, residual learning is embedded into the multiscale kernel CNN to avoid performance degradation and build a deeper network. To validate the effectiveness of the proposed networks, a normal motor and five motors with different failures are tested. The results and comparisons with state-of-the-art methods highlight the superiority of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
(2008) · Journal of Machine Learning Research · Cited by 33,051
Rethinking the Inception Architecture for Computer Vision
Szegedy, C., Vanhoucke, V., Ioffe, S., Shlens, J., & Wojna, Z. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.308 · Cited by 32,138
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
Learning long-term dependencies with gradient descent is difficult
Bengio, Y., Simard, P., & Frasconi, P. (1994) · IEEE Transactions on Neural Networks · doi:10.1109/72.279181 · Cited by 8,542
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Self-citationJia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Fast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
Convolutional neural networks at constrained time cost
He, K., & Sun, J. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7299173 · Cited by 1,558
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Rätsch, G., Onoda, T., & Müller, K.-R. (2001) · Machine Learning · doi:10.1023/a:1007618119488 · Cited by 1,299
Big data deep learning: Challenges and perspectives
Chen, X.-W., & Lin, X. (2014) · IEEE Access · doi:10.1109/access.2014.2325029 · Cited by 1,255
Srivastava, R. K., Greff, K., & Schmidhuber, J. (2015) · arXiv · doi:10.48550/arxiv.1505.00387 · Cited by 912
Multiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
Gan, M., Wang, C., & Zhu, C. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.11.014 · Cited by 550
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Process data analytics in the era of big data
Qin, S. J. (2014) · AIChE Journal · doi:10.1002/aic.14523 · Cited by 383
Self-citationZhao, M., Kang, M., Tang, B., & Pecht, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762639 · Cited by 380
Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2645238 · Cited by 345
Self-citationMultivariate process monitoring and fault diagnosis by multi-scale PCA
Misra, M., Yue, H. H., Qin, S. J., & Ling, C. (2002) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00093-5 · Cited by 325
Self-citationAn enhancement deep feature fusion method for rotating machinery fault diagnosis
Shao, H., Jiang, H., Wang, F., & Zhao, H. (2017) · Knowledge-Based Systems · doi:10.1016/j.knosys.2016.12.012 · Cited by 299
Self-citationPan, J., Zi, Y., Chen, J., Zhou, Z., & Wang, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767540 · Cited by 294
Liao, L., Jin, W., & Pavel, R. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2586442 · Cited by 285
Intelligent Fault Diagnosis of the High-Speed Train With Big Data Based on Deep Neural Networks
Hu, H., Tang, B., Gong, X., Wei, W., & Wang, H. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2683528 · Cited by 222
Qin, Y., Wang, X., & Zou, J. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2856205 · Cited by 221
Yang, B., Liu, R., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2662215 · Cited by 218
Self-citationTime-frequency atoms-driven support vector machine method for bearings incipient fault diagnosis
Liu, R., Yang, B., Zhang, X., Wang, S., & Chen, X. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.12.020 · Cited by 176
Self-citationMultiple wavelet coefficients fusion in deep residual networks for fault diagnosis
Zhao, M., Kang, M., Tang, B., & Pecht, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2866050 · Cited by 174
Giantomassi, A., Ferracuti, F., Iarlori, S., Ippoliti, G., & Longhi, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2370936 · Cited by 168 · cited 1×
“However, as motors have become more and more complex and expensive, the tolerance for performance degradation, productivity decrease, and safety hazards are also becoming less and less [1].”
BackgroundOh, H., Jung, J. H., Jeon, B., & Youn, B. D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2752151 · Cited by 152
Shi, C., Panoutsos, G., Luo, B., Liu, H., Li, B., & Xu, L. H. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2856193 · Cited by 140
Chen, B., Zhang, Z., Sun, C., Li, B., Zi, Y., & He, Z. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.07.007 · Cited by 121
Capturing High-Discriminative Fault Features for Electronics-Rich Analog System via Deep Learning
Liu, Z., Jia, Z. Y., Vong, C., Bu, S., Han, J., & Tang, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2690940 · Cited by 119
Sparse Time-Frequency Representation for Incipient Fault Diagnosis of Wind Turbine Drive Train
Yang, B., Liu, R., & Chen, X. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2828739 · Cited by 83
Self-citation
Cited by
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Yan, S., Shao, H., Wang, J., Zheng, X., & Liu, B. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.121338 · Cited by 389
Task-sequencing meta learning for intelligent few-shot fault diagnosis with limited data
Hu, Y., Liu, R., Li, X., Chen, D., & Hu, Q. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3112504 · Cited by 180
“In recent literature, deep learning-based intelligent fault diagnosis methods have led to a series of breakthroughs due to its attractive characteristic that directly learns the high-level and hierarchical representations from massive raw data [2], [3].”
BackgroundSelf-citationIndustrial Fault Detection using Contrastive Representation Learning on Time-series Data
Zhang, K., Cai, R., & Liu, Y. (2023) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2023.10.1456 · Cited by 2
Metadata
- Authors
- Liu, R., Wang, F., Yang, B., & Qin, S. J.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2020-06
- Volume
- 16
- Issue
- 6
- Pages
- 3797-3806
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2973424371
- Cited by
- 454
- References
- 35
- FWCI
- 17.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.