The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design of Accelerometer-Based Inertial Navigation Systems
Abstract
We examine the feasibility of designing an accelerometer-based (or gyroscope-free) inertial navigation system that uses only accelerometer measurements to compute the linear and angular motions of a rigid body. The accelerometer output equation is derived to relate the linear and angular motions of a rigid body relative to a fixed inertial frame. A sufficient condition is given to determine if a configuration of accelerometers is feasible. If the condition is satisfied, the angular and linear motions can be computed separately using two decoupled equations of an input-output dynamical system: a state equation for angular velocity and an output equation for linear acceleration. This simple computation scheme is derived from the corresponding dynamical system equations for a special cube configuration for which the angular acceleration is expressed as a linear combination of the accelerometer outputs. The effects of accelerometer location and orientation errors are analyzed. Algorithms that identify and compensate these errors are developed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kalman filtering for real-time orientation tracking of handheld microsurgical instrument
Ang, W. T., Khosla, P. K., & Riviere, C. N. (2005) · 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566) · doi:10.1109/iros.2004.1389796 · Cited by 45
Cited by
In-Car Positioning and Navigation Technologies—A Survey
Skog, I., & Handel, P. (2009) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2008.2011712 · Cited by 582
Comparative study on classifying human activities with miniature inertial and magnetic sensors
Altun, K., Barshan, B., & Tunçel, O. (2010) · Pattern Recognition · doi:10.1016/j.patcog.2010.04.019 · Cited by 564
Metadata
- Authors
- Tan, C.-W., & Park, S.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2005-12
- Volume
- 54
- Issue
- 6
- Pages
- 2520-2530
- ISSN
- 0018-9456 (ISSN-L)
- OpenAlex
- W2104511362
- Cited by
- 198
- References
- 1
- FWCI
- 8.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.