The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Predicting Remaining Useful Life of Rolling Bearings Based on Deep Feature Representation and Transfer Learning
Abstract
For the data-driven remaining useful life (RUL) prediction for rolling bearings, the traditional machine learning-based methods generally provide insufficient feature representation and adaptive extraction. Although deep learning-based RUL prediction methods can solve these problems to some extent, they still do not yield satisfactory predictive results due to less degradation data and inconsistent data distribution among different bearings. To solve these problems, a new RUL prediction method based on deep feature representation and transfer learning is proposed in this paper. This method includes an off-line stage and an online stage. In the off-line stage, the Hilbert-Huang transform marginal spectra of the raw vibration signal of auxiliary bearings are first calculated as the input, and then contractive denoising autoencoder is introduced to extract deep features with good and stable fault representation. Second, by using the obtained deep features and Pearson's correlation coefficient, a new health condition assessment method is proposed to divide the whole life of each bearing into a normal state and a fast-degradation state. Finally, using the extracted deep features and their RUL values, an RUL prediction model for the fast-degradation state is trained by means of a least-square support vector machine. In the online stage, a kind of transfer learning algorithm, i.e., transfer component analysis, is introduced to sequentially adjust the features of target bearing from auxiliary bearings, and then the corresponding RUL is predicted using the corrected features. Results using the PHM Challenging 2012 data set show a significant performance improvement when using the proposed method in terms of predictive accuracy and numerical stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Pan, S. J., & Yang, Q. (2010) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2009.191 · Cited by 23,387
Reducing the dimensionality of data with neural networks
Hinton, G. E., & Salakhutdinov, R. R. (2006) · Science · doi:10.1126/science.1127647 · Cited by 20,928
Nonlinear Component Analysis as a Kernel Eigenvalue Problem
Schölkopf, B., Smola, A., & Müller, K.-R. (1998) · Neural Computation · doi:10.1162/089976698300017467 · Cited by 8,084
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Domain Adaptation via Transfer Component Analysis
Pan, S. J., Tsang, I. W., Kwok, J. T., & Yang, Q. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2010.2091281 · Cited by 4,753
(2010) · Journal of Machine Learning Research · doi:10.5555/1756006.1953039 · Cited by 4,051
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Contractive Auto-Encoders: Explicit Invariance During Feature Extraction
Rifai, S., Vincent, P., Muller, X., Glorot, X., & Bengio, Y. (2011) · International Conference on Machine Learning · Cited by 1,600
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
PRONOSTIA : An experimental platform for bearings accelerated degradation tests.
Nectoux, P., Gouriveau, R., Medjaher, K., Ramasso, E., Chebel‐Morello, B., Noureddine Zerhouni, A., & Varnier, C. (2012) · HAL · Cited by 928
Yang, B., Lei, Y., Jia, F., & Xing, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.051 · Cited by 879
Remaining useful life estimation of engineered systems using vanilla LSTM neural networks
Wu, Y., Yuan, M., Dong, S., Lin, L., & Liu, Y. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.05.063 · Cited by 789
Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks
Zhao, R., Yan, R., Wang, J., & Mao, K. (2017) · Sensors · doi:10.3390/s17020273 · Cited by 741
Bearing Health Monitoring Based on Hilbert–Huang Transform, Support Vector Machine, and Regression
Soualhi, A., Medjaher, K., & Zerhouni, N. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2330494 · Cited by 665
Transfer learning via dimensionality reduction
Pan, S. J., Kwok, J. T.-Y., & Yang, Q. (2008) · Rare & Special e-Zone (The Hong Kong University of Science and Technology) · Cited by 653
Abdeljaber, O., Avci, O., Kiranyaz, M. S., Boashash, B., Sodano, H., & Inman, D. J. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.09.069 · Cited by 521
Using Deep Learning-Based Approach to Predict Remaining Useful Life of Rotating Components
Deutsch, J., & He, D. (2018) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2697842 · Cited by 479
Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., Wang, P., & Taek Yoon, J. (2012) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.03.008 · Cited by 361
Remaining useful life estimation based on nonlinear feature reduction and support vector regression
Benkedjouh, T., Medjaher, K., Zerhouni, N., & Rechak, S. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.02.006 · Cited by 353
Cubillo, A., Perinpanayagam, S., & Esperon-Miguez, M. (2016) · Advances in Mechanical Engineering · doi:10.1177/1687814016664660 · Cited by 292
Prediction of Bearing Remaining Useful Life With Deep Convolution Neural Network
Ren, L., Sun, Y., Wang, H., & Zhang, L. (2018) · IEEE Access · doi:10.1109/access.2018.2804930 · Cited by 281
Multi-bearing remaining useful life collaborative prediction: A deep learning approach
Ren, L., Cui, J., Sun, Y., & Cheng, X. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.02.013 · Cited by 280
Discovering Prognostic Features Using Genetic Programming in Remaining Useful Life Prediction
Liao, L. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2270212 · Cited by 274
Li, Y., Yang, Y., Li, G., Xu, M., & Huang, W. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.12.040 · Cited by 273
Guo, L., Lei, Y., Li, N., Yan, T., & Li, N. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.02.083 · Cited by 270
Transfer learning for image classification with sparse prototype representations
Quattoni, A., Collins, M., & Darrell, T. (2008) · 2008 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2008.4587637 · Cited by 252
Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference
Tran, V. T., Yang, B.-S., Oh, M.-S., & Tan, A. C. C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.12.010 · Cited by 224
Bearing degradation process prediction based on the PCA and optimized LS-SVM model
Dong, S., & Luo, T. (2013) · Measurement · doi:10.1016/j.measurement.2013.06.038 · Cited by 218
Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., & Wang, P. (2011) · 2011 IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2011.6024361 · Cited by 205
Estimation of remaining useful life of ball bearings using data driven methodologies
Sutrisno, E., Oh, H., Vasan, A. S. S., & PECHT, M. G. (2012) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2012.6299548 · Cited by 204
Li, Y., Li, G., Yang, Y., Liang, X., & Xu, M. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.12.008 · Cited by 193
A Deep Learning-based Method for Machinery Health Monitoring with Big Data
Lei, Y. (2015) · Journal of Mechanical Engineering · doi:10.3901/jme.2015.21.049 · Cited by 192
Transfer learning for text classification
Shulman, J., & Ng, A. Y. (2005) · neural information processing systems · Cited by 185
Bearing Degradation Evaluation Using Recurrence Quantification Analysis and Kalman Filter
Qian, Y., Yan, R., & Hu, S. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2313034 · Cited by 170
Mao, W., He, J., Tang, J., & Li, Y. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018817184 · Cited by 137
Self-citationStandardizing research methods for prognostics
Uckun, S., Goebel, K., & Lucas, P. (2008) · International Conference on Prognostics and Health Management (PHM) · doi:10.1109/phm.2008.4711437 · Cited by 134
Remaining useful life prediction of rolling element bearings based on health state assessment
Liu, Z., Zuo, M. J., & Qin, Y. (2015) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406215590167 · Cited by 99
Self-citationAn intelligent condition-based maintenance platform for rotating machinery
Tran, V. T., & Yang, B. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.08.159 · Cited by 94
An Enhanced Diagnostic Scheme for Bearing Condition Monitoring
Liu, J., Wang, W., & Golnaraghi, F. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2023814 · Cited by 87
Liu, Z., Qu, J., Zuo, M. J., & Xu, H. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4560-y · Cited by 81
Self-citationBearing life prediction based on vibration signals: A case study and lessons learned
Wang, T. (2012) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2012.6299547 · Cited by 52
EMA remaining useful life prediction with weighted bagging GPR algorithm
Zhang, Y., Liu, D., Yu, J., Peng, Y., & Peng, X. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.03.021 · Cited by 43
Cited by
Ferreira, C., & Gonçalves, G. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.010 · Cited by 417
Industrial applications of digital twins
Jiang, Y., Yin, S., Li, K., Luo, H., & Kaynak, O. (2021) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2020.0360 · Cited by 398
Pan, Z., Meng, Z., Chen, Z., Gao, W., & Shi, Y. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106899 · Cited by 296
Dual-Aspect Self-Attention Based on Transformer for Remaining Useful Life Prediction
Zhang, Z., Song, W., & Li, Q. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3160561 · Cited by 269
Chen, J., Huang, R., Chen, Z., Mao, W., & Li, W. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110239 · Cited by 267
Self-citation
Metadata
- Authors
- Mao, W., He, J., & Zuo, M. J.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2020-04
- Volume
- 69
- Issue
- 4
- Pages
- 1594-1608
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2945413072
- Cited by
- 330
- References
- 46
- FWCI
- 21.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.