A Vision-Based Monitoring Method for the Looseness of High-Strength Bolt
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Bolts are widely applied to the connections of structural components. Under the actions of alternative forces induced by the external loads, the bolts are commonly inevitable to be loosening in engineering, which will be a threat to structural safety. To avoid the reduction of the pretightening force, it is vital to examine the status of bolts periodically. So far, manual inspection with a torque wrench is the most frequently used approach, even though it is time-consuming, labor-intensive, and low frequency of data acquisitions for structural maintenance. Due to the looseness of bolts which commonly follows with relative rotation between bolts and nuts, in this study, a vision-based bolt monitoring system with an Internet of Things (IoT) device is proposed. Specifically, to observe the relative rotation between bolts and nuts, a novel barcode marker (termed PAC-code) is introduced at first. As followed, a corresponding smart device embedded with PAC-code decoding algorithm is also described for the further long-term monitoring of bolt looseness. Finally, a laboratory-based experiment was carried out to validate the reliability and precision of our system. The results indicate that the proposed system is sensitive in the identification of angular changes and can be used to monitor the looseness of bolts as precise as 0.1°. This technique is not only easy to be deployed with high economic efficiency in engineering but also meaningful for the data acquisition in bolts looseness-proof research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Use of the hough transformation to detect lines and curves in pictures
Duda, R. O., & Hart, P. E. (1972) · Communications of the ACM · doi:10.1145/361237.361242 · Cited by 6,633
Cited by
Giordano, M., Baumann, N., Crabolu, M., Fischer, R., Bellusci, G., & Magno, M. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3165816 · Cited by 72
Bolt Loosening Detection Using Key-Point Detection Enhanced by Synthetic Datasets
Lu, Q., Jing, Y., & Zhao, X. (2023) · Applied Sciences · doi:10.3390/app13032020 · Cited by 28
Yang, Z., Zhao, Y., & Xu, C. (2023) · Sensors · doi:10.3390/s23125655 · Cited by 22
“[24] continuously monitor and quantify the rotation of structural bolts using an optical flow-based target-free tracking algorithm after discovering the structural bolts by trained YOLOv3-tiny.”
Method
Metadata
- Authors
- Pan, Y., Ma, Y., Dong, Y., Gu, Z., & Wang, D.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2021
- Volume
- 70
- Pages
- 1-14
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W3195338654
- Cited by
- 44
- References
- 1
- FWCI
- 2.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.