The DOI matches its Crossref record.
Load Balancing Under Heavy Traffic in RPL Routing Protocol for Low Power and Lossy Networks
Abstract
RPL is an IPv6 routing protocol for low-power and lossy networks (LLNs) designed to meet the requirements of a wide range of LLN applications including smart grid AMIs, industrial and environmental monitoring, and wireless sensor networks. RPL allows bidirectional end-to-end IPv6 communication on resource constrained LLN devices, leading to the concept of the Internet of Things (IoT) with thousands and millions of devices interconnected through multihop mesh networks. In this article, we investigate the load balancing and congestion problem of RPL. Specifically, we show that most of the packet losses under heavy traffic are due to congestion, and a serious load balancing problem appears in RPL in terms of routing parent selection. To overcome this problem, this article proposes a simple yet effective queue utilization based RPL (QU-RPL) that achieves load balancing and significantly improves the end-to-end packet delivery performance compared to the standard RPL. QU-RPL is designed for each node to select its parent node considering the queue utilization of its neighbor nodes as well as their hop distances to an LLN border router (LBR). Owing to its load balancing capability, QURPL is very effective in lowering queue losses and increasing the packet delivery ratio. We implement QU-RPL on a low-power embedded platform, and verify all of our findings through experimental measurements on a real testbed of a multihop LLN over IEEE 802.15.4. We present the impact of each design element of QU-RPL on performance in detail, and also show that QU-RPL reduces the queue loss by up to 84 percent and improves the packet delivery ratio by up to 147 percent compared to the standard RPL.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wireless Network Design for Control Systems: A Survey
Park, P., Coleri Ergen, S., Fischione, C., Lu, C., & Johansson, K. H. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2780114 · Cited by 488
Challenging the IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL): A Survey
Kim, H.-S., Ko, J., Culler, D. E., & Paek, J. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2751617 · Cited by 278
Self-citationLearning-Based Resource Management for Low-Power and Lossy IoT Networks
Musaddiq, A., Ali, R., Kim, S. W., & Kim, D.-S. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3152929 · Cited by 23
Metadata
- Authors
- Kim, H.-S., Kim, H., Paek, J., & Bahk, S.
- Venue
- IEEE Transactions on Mobile Computing
- Published
- 2017-04-01
- Volume
- 16
- Issue
- 4
- Pages
- 964-979
- ISSN
- 1536-1233 (ISSN-L)
- OpenAlex
- W2470924389
- Cited by
- 233
- References
- 0
- FWCI
- 30.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Load Balancing Under Heavy Traffic in RPL Routing Protocol for Low Power and Lossy Networks. https://app.cochat.ai/papers/10.1109/tmc.2016.2585107
- The paper
- Kim, H.-S., Kim, H., Paek, J., & Bahk, S. (2017). Load Balancing Under Heavy Traffic in RPL Routing Protocol for Low Power and Lossy Networks. IEEE Transactions on Mobile Computing. https://doi.org/10.1109/tmc.2016.2585107
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.