The DOI matches its Crossref record.
An Energy-Saving Pressure-Compensated Hydraulic System With Electrical Approach
Abstract
Mobile hydraulic systems are developed toward better control performance and higher energy efficiency. Pressure compensators, which govern the pressure drops over the control orifices, are widely used in multiactuator systems to improve their operability. However, additional energy is also dissipated in the compensators especially under the overrunning load conditions. This paper presents a novel energy-saving system, where the compensator is designed as a regeneration device consisting of a hydraulic motor and an electric generator. Then, hydraulic energy can be regenerated and pressure compensation function is realized by adapting the electromagnetic torque of the generator to the load as well. The close-loop control of the generator is designed by effective pressure drop estimation. The proposed energy-saving system and controller are implemented on an experimental platform of hybrid excavators which is equipped with an electric energy storage device. The experimental results show both good control performance and significant energy-saving effect.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The results of the study, summarized in Table 1, show that the energy efficiency of hydraulic fluid power systems is very poor, as demonstrated also by several authors like Wang and Wang (2014).”
From A systematic management and control methodology for high energy saving in applications equipped with hydraulic servo-axes (2024) · cites this paper as Wang and Wang (2014)
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 25
- liu, 2002, Energy-saving control of single-rod hydraulic cylinders with programmable valves and improved working mode selection, paper presented at the Int Off-Highway Powerplant Congr, 10.4271/2002-01-1343 · DOI
- 10.1109/TMECH.2006.878552 · DOI
- 10.1109/TCST.2007.903073 · DOI
- yao, 2009, Integrated mechatronic design of precision and energy saving electro hydraulic systems, Proc Int Conf Fluid Power Trans and Control, 360
- 10.1243/0954406011523983 · DOI
- 10.1016/j.autcon.2011.11.004 · DOI
- 10.1109/TMECH.2011.2153866 · DOI
- 10.1109/TMECH.2007.905691 · DOI
- 10.1115/IMECE2007-42580 · DOI
- andersen, 2005, Regeneration of potential energy in hydraulic forklift trucks, Proc Int Conf Fluid Power Trans and Control, 302
- 10.1007/s00170-008-1553-y · DOI
- 10.1080/14399776.2002.10781137 · DOI
- eriksson, 2011, Individual metering fluid power systems: challenges and opportunities, Proc Inst Mech Eng J Syst Control Eng, 225, 196
- 10.1109/ICAL.2009.5262729 · DOI
- 10.1109/TMECH.2011.2160959 · DOI
- 10.1080/14399776.2005.10781217 · DOI
- finzel, 2009, Electro-hydraulic control systems for mobile machinery with low energy consumption, Proc Int Conf Fluid Power Trans and Control, 214
- 10.1109/TMECH.2010.2096230 · DOI
- stelson, 2011, Saving the world's energy with fluid power, Proceedings of the JFPS International Symposium on Fluid Power, 1
- 10.1049/iet-epa.2009.0302 · DOI
- kang, 2010, A study on the boom energy regeneration system for a hybrid excavator, Proc 7th Int Fluid Power Conf, 129
- 10.1109/TIE.2011.2148682 · DOI
- 10.5739/isfp.2008.617 · DOI
- 10.1016/j.autcon.2010.08.002 · DOI
- 10.1109/3516.828592 · DOI
Cited by
Sorted by citations
Energy-Saving Design Method for Hydraulic Press Drive System with Multi Motor-Pumps
Huang, H., Zou, X., Li, L., Li, X., & Liu, Z. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00085-6 · Cited by 33
Righettini, P., Strada, R., Tiboni, M., Cortinovis, F., & Santinelli, J. (2024) · Control Engineering Practice · doi:10.1016/j.conengprac.2024.105847 · Cited by 15
Metadata
- Authors
- Wang, T., & Wang, Q.
- Affiliations
- Zhejiang University (CN)
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2014-04
- Volume
- 19
- Issue
- 2
- Pages
- 570-578
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W2099982974
- Cited by
- 95
- References
- 0
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 7 · 2023: 4 · 2022: 5 · 2021: 6 · 2020: 12 · 2019: 10 · 2018: 6 · 2017: 12 · 2016: 13 · 2015: 11 · 2014: 7
- FWCI
- 13.70
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE/ASME Transactions on Mechatronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Power Systems and Control
- Keywords
- pressure compensation, hydraulic systems, energy conservation, hydraulic motors, generators, electromagnetic torque control, pressure drop estimation, feedback control, hybrid excavator, electric energy storage, mobile hydraulic systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Energy-Saving Pressure-Compensated Hydraulic System With Electrical Approach. https://app.cochat.ai/papers/10.1109/tmech.2013.2250296
- The paper
- Wang, T., & Wang, Q. (2014). An Energy-Saving Pressure-Compensated Hydraulic System With Electrical Approach. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2013.2250296