The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots
Abstract
The compliant structure and influence of external forces usually result in complex deformation of soft continuum robots, which makes the accurate modeling and control of the robot challenging. In this article, we present a new variable curvature kinematic modeling approach for soft continuum robots by taking the external forces into consideration, achieving both accurate motion simulation and feedforward control of the robot. To this end, the variable curvature configuration is first parameterized based on the absolute nodal coordinate formulation. Then, a kinematic model is developed to describe the mappings between the defined configuration space and the actuation space with payloads. With this model, we achieve accurate and fast motion simulation for the soft continuum robot with different payloads and input pressures within 1 ms, which is verified by a set of experiments. Finally, an inverse-model-based feedforward controller is developed for a two-section soft continuum robot. The experimental results of tracking complex trajectories verify the effectiveness of our model and control strategies. The average position error of the end effector is 2.89% of the robot length. This article can also be served as a tool to design and analyze soft continuum robots with a desired workspace.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Nonlinear Continuum Mechanics for Finite Element Analysis
Bonet, J., & Wood, R. D. (2008) · doi:10.1017/cbo9780511755446 · Cited by 1,824
Soft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570
Design, kinematics, and control of a soft spatial fluidic elastomer manipulator
Marchese, A. D., & Rus, D. (2016) · The International Journal of Robotics Research · doi:10.1177/0278364915587925 · Cited by 330
Cited by
Xavier, M. S., Tawk, C. D., Zolfagharian, A., Pinskier, J., Howard, D., Young, T., Lai, J., Harrison, S. M., Yong, Y. K., Bodaghi, M., et al. (2022) · IEEE Access · doi:10.1109/access.2022.3179589 · Cited by 418
Yasa, O., Toshimitsu, Y., Michelis, M. Y., Jones, L. S., Filippi, M., Buchner, T., & Katzschmann, R. K. (2023) · Annual Review of Control, Robotics, and Autonomous Systems · doi:10.1146/annurev-control-062322-100607 · Cited by 290
Russo, M., Sadati, S. M. H., Dong, X., Mohammad, A., Walker, I. D., Bergeles, C., Xu, K., & Axinte, D. A. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200367 · Cited by 263
Metadata
- Authors
- Huang, X., Zou, J., & Gu, G.
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2021-12
- Volume
- 26
- Issue
- 6
- Pages
- 3175-3185
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W3127125587
- Cited by
- 165
- References
- 4
- FWCI
- 6.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots. https://app.cochat.ai/papers/10.1109/tmech.2021.3055339
- The paper
- Huang, X., Zou, J., & Gu, G. (2021). Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2021.3055339
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.