Continuous Estimation of Human Knee Joint Angles by Fusing Kinematic and Myoelectric Signals
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Exoskeleton robot is an essential tool in active rehabilitation training for patients with lower limb motor dysfunctions. Accurate and real-time recognition in human motion intention is a great challenge in exoskeleton robot, which can be implemented by continues estimation of human joint angles. In this study, we innovatively proposed a novel feature-based convolutional neural network-bi-directional long-short term memory network (CNN-BiLSTM) model to predict the knee joint angles more accurately and in real time. We validated our method on a public dataset, including surface electromyography(sEMG) and inertial measurement unit (IMU) data of 10 healthy subjects during normal walking. Initially, features extraction from each modal data achieved feature-level fusion. Then the importance of each sEMG and IMU signal feature for knee joint angle prediction was quantified by ensemble feature scorer (EFS) and the number of features required for prediction while ensuring accuracy was simplified by profile likelihood maximization (PLM) algorithm. Finally, the CNN-BiLSTM model was created by using the determined simplest features to further fuse the spatio-temporal correlation of signals. The results indicated that the EFS and PLM algorithm could remove the feature redundancy perfectly and estimation performance would become better when bi-modal gait data were fused. For the estimation performance, the average root mean square error (RMSE), adjusted [Formula: see text] and pearson correlation coefficient (CC) of our algorithm were 4.07, 0.95, and 0.98, respectively, which was better than CNN, BiLSTM and other three traditional machine learning methods. In addition, the model test time was 62.47 ± 0.29 ms, which was less than the predicted horizon of 100 ms. The real-time performance and accuracy are satisfactory. Compared with previous works, our method has great advantages in feature selection and model design, which further improves the prediction accuracy. These promising results demonstrate that the proposed method has considerable potential to be applied to exoskeleton robot control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey on feature selection methods
Chandrashekar, G., & Sahin, F. (2014) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2013.11.024 · Cited by 5,189 · cited 1×
“The influence of the feature on the result can be obtained by calculating CC ( fj, T ) and MIC ( fj, T ) [27].”
MethodHuang, H., Zhang, F., Hargrove, L. J., Dou, Z., Rogers, D. R., & Englehart, K. B. (2011) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2011.2161671 · Cited by 542 · cited 1×
“Previous studies have shown that these time-domain signal features are very effective in motion pattern recognition of lower limbs [3], [24], [31],”
BackgroundRecent advances in feature selection and its applications
Li, Y., Li, T., & Liu, H. (2017) · Knowledge and Information Systems · doi:10.1007/s10115-017-1059-8 · Cited by 400 · cited 1×
“It has been confirmed that ensemble feature selection is a stable feature selection method, which can combine the advantages of different methods to generate feature subsets and address the limitations of a single algorithm [37], [38], [39].”
MethodSemwal, V. B., Gupta, A., & Lalwani, P. (2021) · The Journal of Supercomputing · doi:10.1007/s11227-021-03768-7 · Cited by 151 · cited 1×
“Therefore, to fully consider the spatio-temporal correlation of gait data, some researchers used the CNN-LSTM model for gait pattern recognition [20], [21], [22].”
MethodClinical Human Gait Classification: Extreme Learning Machine Approach
Patil, P., Kumar, K. S., Gaud, N., & Semwal, V. B. (2019) · 2019 1st International Conference on Advances in Science, Engineering and Robotics Technology (ICASERT) · doi:10.1109/icasert.2019.8934463 · Cited by 97 · cited 1×
“Many researchers focused on the classification problem of gait patterns, such as literatures [8], [9], [10], [11].”
Background
Cited by
Deep Learning Approaches for Enhanced Lower-Limb Exoskeleton Control: A Review
Belal, M., Alsheikh, N., Aljarah, A., & Hussain, I. (2024) · IEEE Access · doi:10.1109/access.2024.3414175 · Cited by 42
Liu, X.-Y., Li, G., Zhou, X.-H., Liang, X., & Hou, Z.-G. (2025) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2025.3565754 · Cited by 36
“Model-free methods based on deep networks, which can obtain higher-level features from sensor signals without domain-specific knowledge, have achieved great success in recent years, such as CNN [38], LSTM [37], CNN-BiLSTM [36].”
Zhang, C., Yu, Z., Wang, X., Chen, Z.-J., Deng, C., & Xie, S. Q. (2024) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2024.106551 · Cited by 21
Metadata
- Authors
- Sun, N., Cao, M., Chen, Y., Chen, Y., Wang, J., Wang, Q., Chen, X., & Liu, T.
- Venue
- IEEE Transactions on Neural Systems and Rehabilitation Engineering
- Published
- 2022
- Volume
- 30
- Pages
- 2446-2455
- ISSN
- 1534-4320 (ISSN-L)
- 1558-0210
- OpenAlex
- W4292970538
- Cited by
- 56
- References
- 5
- FWCI
- 2.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Continuous Estimation of Human Knee Joint Angles by Fusing Kinematic and Myoelectric Signals. https://app.cochat.ai/papers/10.1109/tnsre.2022.3200485
- The paper
- Sun, N., Cao, M., Chen, Y., Chen, Y., Wang, J., Wang, Q., Chen, X., & Liu, T. (2022). Continuous Estimation of Human Knee Joint Angles by Fusing Kinematic and Myoelectric Signals. IEEE Transactions on Neural Systems and Rehabilitation Engineering. https://doi.org/10.1109/tnsre.2022.3200485
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.