The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Identifying and Locating Surface Defects in Wood: Part of an Automated Lumber Processing System
Abstract
Continued increases in the cost of materials and labor make it imperative for furniture manufacturers to control costs by improved yield and increased productivity. This paper describes an Automated Lumber Processing System (ALPS) that employs computer tomography, optical scanning technology, the calculation of an optimum cutting strategy, and a computer-driven laser cutting device. While certain major hardware components of ALPS are already commercially available, a major missing element is the automatic inspection system needed to locate and identify surface defects on boards. This paper reports research aimed at developing such an inspection system. The basic strategy is to divide the digital image of a board into a number of disjoint rectangular regions and classify each independently. This simple procedure has the advantage of allowing an obvious parallel processing implementation. The study shows that measures of tonal and pattern related qualities are needed. The tonal measures are the mean, variance, skewness, and kurtosis of the gray levels. The pattern related measures are those based on cooccurrence matrices. In this initial feasibility study, these combined measures yielded an overall 88.3 percent correct classification on the eight defects most commonly found in lumber. To minimize the number of calculations needed to make the required classifications a sequential classifier is proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Textural Features for Image Classification
Haralick, R. M., Shanmugam, K., & Dinstein, I. (1973) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1973.4309314 · Cited by 22,886
Cited by
Computer-Vision-Based Fabric Defect Detection: A Survey
Kumar, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1930.896476 · Cited by 725
A Review of Recent Advances in Surface Defect Detection using Texture analysis Techniques
Xie, X. (2008) · ELCVIA Electronic Letters on Computer Vision and Image Analysis · doi:10.5565/rev/elcvia.268 · Cited by 500
A Generic Deep-Learning-Based Approach for Automated Surface Inspection
Ren, R., Hung, T., & Tan, K. C. (2018) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2017.2668395 · Cited by 485
Defect detection in textured materials using Gabor filters
Kumar, A., & Pang, G. K. H. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/28.993164 · Cited by 475
Visual-Based Defect Detection and Classification Approaches for Industrial Applications—A SURVEY
Czimmermann, T., Ciuti, G., Milazzo, M., Chiurazzi, M., Roccella, S., Oddo, C. M., & Dario, P. (2020) · Sensors · doi:10.3390/s20051459 · Cited by 441
Metadata
- Authors
- Conners, R. W., Mcmillin, C. W., Lin, K., & Vasquez-Espinosa, R. E.
- Venue
- IEEE Transactions on Pattern Analysis and Machine Intelligence
- Published
- 1983-11
- Volume
- PAMI-5
- Issue
- 6
- Pages
- 573-583
- ISSN
- 0162-8828 (ISSN-L)
- OpenAlex
- W2017672812
- Cited by
- 201
- References
- 1
- FWCI
- 15.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Identifying and Locating Surface Defects in Wood: Part of an Automated Lumber Processing System. https://app.cochat.ai/papers/10.1109/tpami.1983.4767446
- The paper
- Conners, R. W., Mcmillin, C. W., Lin, K., & Vasquez-Espinosa, R. E. (1983). Identifying and Locating Surface Defects in Wood: Part of an Automated Lumber Processing System. IEEE Transactions on Pattern Analysis and Machine Intelligence. https://doi.org/10.1109/tpami.1983.4767446
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.