The DOI matches its Crossref record.
Geometric properties of central catadioptric line images and their application in calibration
Abstract
In central catadioptric systems, lines in a scene are projected to conic curves in the image. This work studies the geometry of the central catadioptric projection of lines and its use in calibration. It is shown that the conic curves where the lines are mapped possess several projective invariant properties. From these properties, it follows that any central catadioptric system can be fully calibrated from an image of three or more lines. The image of the absolute conic, the relative pose between the camera and the mirror, and the shape of the reflective surface can be recovered using a geometric construction based on the conic loci where the lines are projected. This result is valid for any central catadioptric system and generalizes previous results for paracatadioptric sensors. Moreover, it is proven that systems with a hyperbolic/elliptical mirror can be calibrated from the image of two lines. If both the shape and the pose of the mirror are known, then two line images are enough to determine the image of the absolute conic encoding the camera's intrinsic parameters. The sensitivity to errors is evaluated and the approach is used to calibrate a real camera.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Toolbox for Easily Calibrating Omnidirectional Cameras
Scaramuzza, D., Martinelli, A., & Siegwart, R. (2006) · 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2006.282372 · Cited by 510
A toolbox for easily calibrating omnidirectional cameras
Scaramuzza, D., Martinelli, A., & Siegwart, R. (2006) · doi:10.3929/ethz-a-005704721 · Cited by 405
Learning to Calibrate Straight Lines for Fisheye Image Rectification
Xue, Z., Xue, N., Xia, G.-S., & Shen, W. (2019) · 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2019.00174 · Cited by 94
Unifying Image Plane Liftings for Central Catadioptric and Dioptric Cameras
Barreto, J. P. (2006) · Imaging Beyond the Pinhole Camera · doi:10.1007/978-1-4020-4894-4_2 · Cited by 26
Self-citation
Metadata
- Authors
- Barreto, J. P., & Araujo, H.
- Venue
- IEEE Transactions on Pattern Analysis and Machine Intelligence
- Published
- 2005-08
- Volume
- 27
- Issue
- 8
- Pages
- 1327-1333
- ISSN
- 0162-8828 (ISSN-L)
- OpenAlex
- W2132653682
- Cited by
- 180
- References
- 0
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.