The DOI matches its Crossref record.
A novel maximum power point tracker for PV panels using switching frequency modulation
Abstract
A novel technique for efficiently extracting maximum power from photovoltaic (PV) panels is presented. The power conversion stage, which is connected between a PV panel and a load or bus, is a SEPIC or Cuk converter or their derived circuits operating in discontinuous inductor-current or capacitor-voltage mode. A method of locating the maximum power point (MPP) is based on injecting a small-signal sinusoidal perturbation into the switching frequency and comparing the AC component and the average value of the panel terminal voltage. Apart from not requiring any sophisticated digital computation of the panel power, the proposed technique does not approximate the panel characteristics and can globally locate the MPP under wide insolation conditions. The tracking capability has been verified experimentally with a 10 W solar panel under a controlled experimental setup. Performances under the steady state and in the large-signal change of the insolation level will are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Optimization of Perturb and Observe Maximum Power Point Tracking Method
Femia, N., Petrone, G., Spagnuolo, G., & Vitelli, M. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850975 · Cited by 3,002
A Comparative Study on Maximum Power Point Tracking Techniques for Photovoltaic Power Systems
Subudhi, B., & Pradhan, R. (2013) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2202294 · Cited by 1,867
On the Perturb-and-Observe and Incremental Conductance MPPT Methods for PV Systems
Sera, D., Mathe, L., Kerekes, T., Spataru, S. V., & Teodorescu, R. (2013) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2013.2261118 · Cited by 823
Maximum Energy Efficiency Tracking for Wireless Power Transfer Systems
Zhong, W. X., & Hui, S. Y. R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2351496 · Cited by 476
Self-citationA current and future study on non-isolated DC–DC converters for photovoltaic applications
Taghvaee, M. H., Radzi, M. A. M., Moosavain, S. M., Hizam, H., & Hamiruce Marhaban, M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.09.023 · Cited by 313
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
Resistor Emulation Approach to Low-Power RF Energy Harvesting
Paing, T., Shin, J., Zane, R., & Popovic, Z. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921167 · Cited by 264
Dehbonei, H., Lee, S. R., & Nehrir, H. (2009) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2009.4805261 · Cited by 53
Metadata
- Authors
- Tse, K. K., Ho, M. T., Chung, H. S.-H., & Hui, S. Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2002-11
- Volume
- 17
- Issue
- 6
- Pages
- 980-989
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2128919138
- Cited by
- 172
- References
- 0
- FWCI
- 4.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.