The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
A Cost-Effective Single-Stage Inverter With Maximum Power Point Tracking
Abstract
Renewable energy, such as solar energy, is desirable for power generation due to their unlimited existence and environmental friendly nature. However, the high initial investment impedes its wide commercialization. This paper proposes a cost-effective single-stage inverter with maximum power point tracking (MPPT) in combination with one-cycle control (OCC) for photovoltaic power generation. This control scheme is based on the output current-adjusting feature of OCC. The output current of the inverter can be adjusted according to the voltage of the photovoltaic (PV) array so as to extract the maximum power from it. In the mean time, OCC guarantees that the output current is proportional and in phase with the grid voltage. All these are accomplished in one power stage and a simple control circuit. No detection and calculation of power are needed. Compared with previously proposed approaches, this method is much more efficient and cost-effective and yet exhibits excellent performance. The principle is explained qualitatively and extensive experiments have been carried out to verify the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
Hussein, K. H. (1995) · IEE Proceedings - Generation, Transmission and Distribution · doi:10.1049/ip-gtd:19951577 · Cited by 1,764
Dynamic Behavior of a Class of Photovoltaic Power Systems
Wasynezuk, O. (1983) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1983.318109 · Cited by 362
Design and Analysis of Microprocessor-Controlled Peak-Power-Tracking System 1
Huynh, P., & Cho, B. (1992) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/929080 · Cited by 72
Huynh, P., & Cho, B. H. (1996) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.481260 · Cited by 69
Cited by
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Esram, T., & Chapman, P. L. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874230 · Cited by 5,425
A Comparative Study on Maximum Power Point Tracking Techniques for Photovoltaic Power Systems
Subudhi, B., & Pradhan, R. (2013) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2202294 · Cited by 1,867
Transformerless Inverter for Single-Phase Photovoltaic Systems
Gonzalez, R., Lopez, J., Sanchis, P., & Marroyo, L. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.892120 · Cited by 692
Reliability Issues in Photovoltaic Power Processing Systems
Petrone, G., Spagnuolo, G., Teodorescu, R., Veerachary, M., & Vitelli, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924016 · Cited by 579
Maximum power point tracking (MPPT) techniques: Recapitulation in solar photovoltaic systems
Verma, D., Nema, S., Shandilya, A. M., & Dash, S. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.068 · Cited by 420
Metadata
- Authors
- Chen, Y., & Smedley, K. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2004-09
- Volume
- 19
- Issue
- 5
- Pages
- 1289-1294
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2103026910
- Cited by
- 317
- References
- 4
- FWCI
- 6.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Cost-Effective Single-Stage Inverter With Maximum Power Point Tracking. https://app.cochat.ai/papers/10.1109/tpel.2004.833458
- The paper
- Chen, Y., & Smedley, K. M. (2004). A Cost-Effective Single-Stage Inverter With Maximum Power Point Tracking. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2004.833458
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.