The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
A High Efficiency Dual-Mode Buck Converter IC For Portable Applications
Abstract
This paper presents the design of a novel wide output current range dual-mode dc to dc step-down (Buck) switching regulator/converter. The converter can adaptively switch between pulsewidth modulation (PWM) and pulse-frequency modulation (PFM) both with very high conversion efficiency. Under light load condition the converter enters PFM mode. The function of closing internal idle circuits is implemented to save unnecessary switching losses. The converter can be switched to PWM mode when the load current is greater than 100 mA. Soft start operation is designed to eliminate the excess large current at the start up of the regulator. The chip has been fabricated with a TSMC 2P4M 0.35 mum polycide CMOS process. The range of the operation voltage is from 2.7 to 5 V, which is suitable for single-cell lithium-ion battery supply applications. The maximum conversion efficiency is 95% at 50 mA load current. Above 85 % conversion efficiency can be reached for load current from 3 to 460 mA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design of Analog CMOS Integrated Circuits
Razavi, B. (1999) · Cited by 6,609
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Analog Integrated Circuit Design
Carusone, A. C., Johns, D. A., & Martin, K. W. (1996) · Cited by 2,509
Analog integrated circuit design
Hurst, S. L. (1998) · Microelectronics Journal · doi:10.1016/s0026-2692(97)00051-7 · Cited by 1,732
Pressman, A. I. (1991) · Cited by 1,134
Hastings, A. E. (2000) · Cited by 540
A Low Voltage, Dynamic, Noninverting, Synchronous Buck-Boost Converter for Portable Applications
Sahu, B., & Rincon-Mora, G. A. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823196 · Cited by 377
Cited by
Control design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Metadata
- Authors
- Liou, W.-R., Yeh, M.-L., & Kuo, Y. L.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2008-03
- Volume
- 23
- Issue
- 2
- Pages
- 667-677
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2041927045
- Cited by
- 254
- References
- 8
- FWCI
- 14.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.