The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Switching Control Strategy to Minimize Dual Active Bridge Converter Losses
Open accessAbstract
A switching control strategy to control the power flow and minimize the total power losses of the dual active bridge converter topology is proposed in this paper. The control strategy consists of driving the bridge with the largest dc voltage to generate a three-level pulsewidth-modulated (PWM) voltage waveform. This PWM is ruled by two manipulated variables: the phase shift between the primary and secondary transformer voltages and the modulation index. These variables are calculated using an algorithm that is deduced on the basis of particular calculation and analysis of converter losses, which are also presented in this paper. An experimental prototype was implemented to validate the theoretical analysis and feasibility of the proposal. The experimental results revealed that the overall efficiency of this converter can be improved up to 10% using the control strategy instead of the conventional one.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“2020902 storage systems)] to adapt different voltage levels and control the power flow between the different components [7]–[14].”
BackgroundTransformer and Inductor Design Handbook
McLyman, C. W. T. (2004) · CRC Press eBooks · doi:10.1201/9780203913598 · Cited by 1,369
Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles
Burke, A. F. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892490 · Cited by 791
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915129 · Cited by 478
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching
Tao, H., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915023 · Cited by 404
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
A ZVS Bidirectional DC–DC Converter With Phase-Shift Plus PWM Control Scheme
Xiao, H., & Xie, S. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915188 · Cited by 299
Yoo, H., Sul, S.-K., Park, Y., & Jeong, J. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.912749 · Cited by 264
A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms
Roshen, W. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886608 · Cited by 232
A comparison of high-power DC-DC soft-switched converter topologies
Steigerwald, R. L., De Doncker, R. W., & Kheraluwala, H. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.536876 · Cited by 231
A review of soft-switched DC-AC converters
Wu, T. S., Bellar, M. D., Tchamdjou, A., Mahdavi, J., & Ehsani, M. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.560222 · Cited by 213
Extending the ZVS operating range of dual active bridge high-power DC-DC converters
Oggier, G. G., Leidhold, R., Garcia, G. O., Oliva, A. R., Balda, J. C., & Barlow, F. (2006) · 2006 37th IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2006.1712142 · Cited by 166
Self-citationSu, G.-J., & Tang, L. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005386 · Cited by 108
Power electronics in hybrid electric vehicle applications
Miller, J. M. (2003) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2003.1179171 · Cited by 79
Fujii, K., Koellensperger, P., & Doncker, R. W. D. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911771 · Cited by 70
Design optimisation of a resonant turn-offsnubber for high-power converters
Mouton, T., Combrink, F. W., Enslin, J. H. R., et al. (2001) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20010370 · Cited by 4
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2157976 · Cited by 635
Pwm control of dual active bridge: Comprehensive analysis and experimental verification
Jain, A. K., & Ayyanar, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2070519 · Cited by 567
Generalized Average Modeling of Dual Active Bridge DC–DC Converter
Qin, H., & Kimball, J. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2165734 · Cited by 557
Metadata
- Authors
- Oggier, G. G., GarcÍa, G. O., & Oliva, A. R.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2009-07
- Volume
- 24
- Issue
- 7
- Pages
- 1826-1838
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2108957158
- Cited by
- 514
- References
- 22
- FWCI
- 16.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.