The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System
Abstract
A new three-input dc-dc boost converter is proposed in this paper. The proposed converter interfaces two unidirectional input power ports and a bidirectional port for a storage element in a unified structure. This converter is interesting for hybridizing alternative energy sources such as photovoltaic (PV) source, fuel cell (FC) source, and battery. Supplying the output load, charging or discharging the battery can be made by the PV and the FC power sources individually or simultaneously. The proposed structure utilizes only four power switches that are independently controlled with four different duty ratios. Utilizing these duty ratios, tracking the maximum power of the PV source, setting the FC power, controlling the battery power, and regulating the output voltage are provided. Depending on utilization state of the battery, three different power operation modes are defined for the converter. In order to design the converter control system, small-signal model is obtained in each operation mode. Due to interactions of converter control loops, decoupling network is used to design separate closed-loop controllers. The validity of the proposed converter and its control performance are verified by simulation and experimental results for different operation conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
(1990) · Elsevier eBooks · doi:10.1016/c2013-0-00941-3 · Cited by 996
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-00847-1 · Cited by 940
Masoum, M. A. S., Dehbonei, H., & Fuchs, E. F. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.805205 · Cited by 818
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Novel maximum-power-point-tracking controller for photovoltaic energy conversion system
Kuo, Y.-C., Liang, T.-J., & Chen, J.-F. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.925586 · Cited by 691
A multiple-input DC-DC converter topology
Dobbs, B. G., & Chapman, P. L. (2003) · IEEE Power Electronics Letters · doi:10.1109/lpel.2003.813481 · Cited by 511
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
Design of Multiple-Input Power Converter for Hybrid Vehicles
Solero, L., Lidozzi, A., & Pomilio, J. A. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854020 · Cited by 478
Cited by
Review of Multiport Converters for Solar and Energy Storage Integration
Bhattacharjee, A. K., Kutkut, N., & Batarseh, I. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830788 · Cited by 423
(2019) · doi:10.1109/pedstc.2019.8697865 · Cited by 16
Metadata
- Authors
- Nejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-05
- Volume
- 27
- Issue
- 5
- Pages
- 2309-2324
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2128826967
- Cited by
- 406
- References
- 31
- FWCI
- 14.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System. https://app.cochat.ai/papers/10.1109/tpel.2011.2172465
- The paper
- Nejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M. (2012). Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2011.2172465
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
