Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction Losses
The DOI matches its Crossref record.
Abstract
With the rapid growth of battery-powered portable electronics, an efficient power management solution is necessary for extending battery life. Generally, basic switching regulators, such as buck and boost converters, may not be capable of using the entire battery output voltage range (e.g., 2.5-4.7 V for Li-ion batteries) to provide a fixed output voltage (e.g., 3.3 V). In this paper, an average-current-mode noninverting buck-boost dc-dc converter is proposed. It is not only able to use the full output voltage range of a Li-ion battery, but it also features high power efficiency and excellent noise immunity. The die area of this chip is 2.14 × 1.92 mm2, fabricated by using TSMC 0.35 μm 2P4M 3.3 V/5 V mixed-signal polycide process. The input voltage of the converter may range from 2.3 to 5 V with its output voltage set to 3.3 V, and its switching frequency is 500 kHz. Moreover, it can provide up to 400-mA load current, and the maximal measured efficiency is 92.01%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Investigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221
“This paper focuses on the advantages of using forthcoming GaN power devices [20] in place of Si-based devices (IGBT, MOSFET) in various power electronic converters such as boost [21]–[24], buck–boost [25], [26], inverter [27], [28], and finally, in a single-phase online UPS system [29], [30].”
BackgroundMethodInfluentialAnalysis of dual-carrier modulator for bidirectional noninverting buck–boost converter
Aharon, I., Kuperman, A., & Shmilovitz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315993 · Cited by 97
“tional versions of the BDNIBB converter were proposed in [23] and [24].”
Praneeth, A. V. J. S., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2919197 · Cited by 50
Metadata
- Authors
- Wei, C.-L., Chen, C.-H., Wu, K.-C., & Ko, I.-T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-12
- Volume
- 27
- Issue
- 12
- Pages
- 4934-4943
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1967190368
- Cited by
- 128
- References
- 0
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction Losses. https://app.cochat.ai/papers/10.1109/tpel.2012.2193144
- The paper
- Wei, C.-L., Chen, C.-H., Wu, K.-C., & Ko, I.-T. (2012). Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction Losses. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2012.2193144
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.