The DOI matches its Crossref record.
Enhanced Load Step Response for a Bidirectional DC–DC Converter
Abstract
An essential requirement for a high-performance dual active bridge (DAB) dc-dc converter is to rapidly and accurately maintain its DC output voltage under all operating conditions. This paper uses a novel harmonic modeling strategy to create a linearized dynamic model of a DAB that accurately identifies its transient response to both a reference voltage change and an output load-current change. Using this model, a feedforward compensation strategy is presented that significantly improves the DAB's transient response to an output load change. The transient performance is then further enhanced by analytically compensating for the nonlinear dead-time distortion that is caused by the converter switching processes. The resultant control system achieves rapid and precise output voltage regulation for both reference voltage and output load changes. The theoretical analysis is confirmed by both matching simulation and experimental investigations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Modeling and Advanced Control of Dual-Active-Bridge DC–DC Converters: A Review
Shao, S., Chen, L., Shan, Z., Gao, F., Chen, H., Sha, D., & Dragičević, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108157 · Cited by 488
Minimum-Current-Stress Scheme of Dual Active Bridge DC-DC Converter With Unified-phase-shift Control
Hou, N., Song, W., & wu, M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2521410 · Cited by 369
Virtual Direct Power Control Scheme of Dual Active Bridge DC–DC Converters for Fast Dynamic Response
Song, W., Hou, N., & Wu, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2682982 · Cited by 256
An Improved Generalized Average Model of DC–DC Dual Active Bridge Converters
Mueller, J. A., & Kimball, J. W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2797966 · Cited by 118
Analysis of dual-carrier modulator for bidirectional noninverting buck–boost converter
Aharon, I., Kuperman, A., & Shmilovitz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315993 · Cited by 97
Nonlinear $C_{oss}-V_{DS}$ Profile Based ZVS Range Calculation for Dual Active Bridge Converters
Liu, B., Davari, P., & Blaabjerg, F. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3003248 · Cited by 35
“In this letter, by using the dead time compensation methods in [12], the practical control variables are depicted in details, as shown in Fig.”
BackgroundMethod
Metadata
- Authors
- Segaran, D., Holmes, D. G., & McGrath, B. P.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-01
- Volume
- 28
- Issue
- 1
- Pages
- 371-379
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2053860835
- Cited by
- 219
- References
- 0
- FWCI
- 5.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.