High Step-Up Interleaved Converter With Built-In Transformer Voltage Multiplier Cells for Sustainable Energy Applications
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this paper, the built-in transformer voltage multiplier cell is inserted into each phase of the conventional interleaved boost converter to provide additional control freedom for the voltage gain extension without extreme duty cycle. The voltage multiplier cell is only composed of the built-in transformer windings, diodes and small capacitors. And additional active switches are not required to simplify the circuit configuration. Furthermore, the switch voltage stress and the diode peak current are also minimized due to the built-in transformer voltage multiplier cells to improve the conversion efficiency. Moreover, there is no reverse-recovery problem for the clamp diodes and the reverse-recovery current for the regenerative and output diodes are controlled by the leakage inductance of the built-in transformer to reduce the relative losses. In addition, the switch turn-off voltage spikes are suppressed effectively by the ingenious and inherent passive clamp scheme and zero current switch (ZCS) turn-on is realized for the switches, which can enhance the power device reliability. Finally, a 40 V-input 380 V-output 1 kW prototype is built to demonstrate the clear advantages of the proposed converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Self-citation
Cited by
Forouzesh, M., Shen, Y., Yari, K., Siwakoti, Y. P., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2746750 · Cited by 431
Ajami, A., Ardi, H., & Farakhor, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360495 · Cited by 406
Reconfigurable DC/DC Converter for Efficiency and Reliability Optimization
Sakly, J., Bennani-Ben Abdelghani, A., Slama-Belkhodja, I., & Sammoud, H. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2676027 · Cited by 42
Metadata
- Authors
- Li, W., Li, W., Xiang, X., Hu, Y., & He, X.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-06
- Volume
- 29
- Issue
- 6
- Pages
- 2829-2836
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2102804329
- Cited by
- 173
- References
- 1
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.