The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Modified SEPIC Converter With High Static Gain for Renewable Applications
Abstract
Two high static gain step-up dc-dc converters based on the modified SEPIC converter are presented in this paper. The proposed topologies present low switch voltage and high efficiency for low input voltage and high output voltage applications. The configurations with magnetic coupling and without magnetic coupling are presented and analyzed. The magnetic coupling allows the increase of the static gain maintaining a reduced switch voltage. The theoretical analysis and experimental results show that both structures are suitable for high static gain applications as a renewable power sources with low dc output voltage. Two experimental prototypes were developed with an input voltage equal to 15 V and an output power equal to 100 W. The efficiency at nominal power obtained with the prototype without magnetic coupling was equal to 91.9% with an output voltage of 150 V. The prototype with magnetic coupling operating with an output voltage equal to 300 V, presents an efficiency at nominal power equal to 92.2%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Cited by
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
Metadata
- Authors
- Gules, R., dos Santos, W. M., dos Reis, F. A., Romaneli, E. F. R., & Badin, A. A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-11
- Volume
- 29
- Issue
- 11
- Pages
- 5860-5871
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2320972339
- Cited by
- 280
- References
- 1
- FWCI
- 6.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Modified SEPIC Converter With High Static Gain for Renewable Applications. https://app.cochat.ai/papers/10.1109/tpel.2013.2296053
- The paper
- Gules, R., dos Santos, W. M., dos Reis, F. A., Romaneli, E. F. R., & Badin, A. A. (2014). A Modified SEPIC Converter With High Static Gain for Renewable Applications. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2013.2296053
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
