The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Symmetric and Asymmetric Design and Implementation of New Cascaded Multilevel Inverter Topology
Abstract
Nowadays, use of multilevel inverters in high-power applications clearly can be seen. High quality and lower distortion of the output voltage and low blocking voltage of semiconductor switches are being presented as the major privileges of the multilevel inverter compared to the traditional voltage source inverter. In this paper, a new topology of multilevel inverter is proposed as fundamental block. The proposed topology is generalized using series connection of the fundamental blocks. The proposed multilevel inverter has been analyzed in both symmetric and asymmetric operation modes. A great perfection in voltage levels number with minimum switching devices has been obtained in both symmetric and asymmetric modes. Thereafter, a detailed study of losses and peak inverse voltage (PIV) of the proposed multilevel inverter is given. Also, in continuation, a comparison between the proposed topology and the traditional one and a recently developed topology is carried out. Finally, a computer simulation using MATLAB/Simulink is presented and a laboratory prototype implementation verifies the results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilevel inverters: a survey of topologies, controls, and applications
Rodriguez, J., Lai, J.-S., & Peng, F. Z. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.801052 · Cited by 6,715
A New Neutral-Point-Clamped PWM Inverter
Nabae, A., Takahashi, I., & Akagi, H. (1981) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1981.4503992 · Cited by 5,139
Multilevel converters for large electric drives
Tolbert, L. M., Peng, F. Z., & Habetler, T. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.740843 · Cited by 1,408
Schweizer, M., & Kolar, J. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203151 · Cited by 1,006
A Cascade Multilevel Converter Topology With Reduced Number of Switches
Babaei, E. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005192 · Cited by 669
Guan, M., & Xu, Z. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192752 · Cited by 549
A Generalized Cascaded Multilevel Inverter Using Series Connection of Submultilevel Inverters
Kangarlu, M. F., & Babaei, E. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203339 · Cited by 442
A Single-Phase Multilevel Inverter Using Switched Series/Parallel DC Voltage Sources
Hinago, Y., & Koizumi, H. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030204 · Cited by 430
Performance analysis of hybrid photovoltaic/diesel energy system under Malaysian conditions
Lau, K. Y., Yousof, M. F. M., Arshad, S. N. M., Anwari, M., & Yatim, A. H. M. (2010) · Energy · doi:10.1016/j.energy.2010.04.008 · Cited by 365
Peng, H., Hagiwara, M., & Akagi, H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2199519 · Cited by 77
Cited by
A Self-Balanced Step-Up Multilevel Inverter Based on Switched-Capacitor Structure
Taghvaie, A., Adabi, J., & Rezanejad, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2669377 · Cited by 475
Bana, P. R., Panda, K. P., Naayagi, R. T., Siano, P., & Panda, G. (2019) · IEEE Access · doi:10.1109/access.2019.2913447 · Cited by 361
Metadata
- Authors
- Mokhberdoran, A., & Ajami, A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-12
- Volume
- 29
- Issue
- 12
- Pages
- 6712-6724
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1992493509
- Cited by
- 298
- References
- 12
- FWCI
- 16.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Symmetric and Asymmetric Design and Implementation of New Cascaded Multilevel Inverter Topology. https://app.cochat.ai/papers/10.1109/tpel.2014.2302873
- The paper
- Mokhberdoran, A., & Ajami, A. (2014). Symmetric and Asymmetric Design and Implementation of New Cascaded Multilevel Inverter Topology. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2014.2302873
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.