Deadtime Effect on GaN-Based Synchronous Boost Converter and Analytical Model for Optimal Deadtime Selection
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
It is widely acknowledged that gallium nitride (GaN)-based power switching devices are superior to conventional silicon (Si) devices in terms of lower semiconductor loss and faster switching speed. However, the deadtime related losses in GaN HEMT-based converters can be detrimental if not optimized, especially when operating at very high switching frequencies. This paper proposes an original analytical model for deadtime optimization for the GaN converters. The proposed model is more accurate than conventional deadtime optimization methods used in Si converters. A GaN-based synchronous boost converter is used as a case study. Circuit simulation and experimental tests are successfully performed to verify the analysis and proposed model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 1×
“In recent years, there has been a focus on wide-bandgap (WBG) semiconductor materials, such as silicon carbide (SiC) and gallium nitride (GaN) [2]–[5].”
BackgroundSilicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537 · cited 1×
“Conventional silicon (Si)-based power devices have seen tremendous improvements over the past 60 years, but their performances are limited by the physical properties of Si material [1].”
BackgroundInvestigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications
Mitova, R., Ghosh, R., Mhaskar, U., Klikic, D., Wang, M.-X., & Dentella, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286639 · Cited by 221
Cited by
A review of galvanically isolated impedance-source DC-DC converters
Chub, A., Vinnikov, D., Blaabjerg, F., & Peng, F. Z. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2453128 · Cited by 243
Adoption of wide bandgap technology in hybrid/electric vehicles-opportunities and challenges
Han, D., Li, S., Lee, W., & Sarlioglu, B. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993332 · Cited by 34
Self-citationAbd El-Azeem, S. M., & El-Ghanam, S. M. (2020) · Cryogenics · doi:10.1016/j.cryogenics.2020.103071 · Cited by 23
Metadata
- Authors
- Han, D., & Sarlioglu, B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-01
- Volume
- 31
- Issue
- 1
- Pages
- 601-612
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2087708708
- Cited by
- 88
- References
- 3
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.