Novel Dual-Phase-Shift Control With Bidirectional Inner Phase Shifts for a Dual-Active-Bridge Converter Having Low Surge Current and Stable Power Control
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
To transmit constant powers particularly at light load, the isolated dual active bridge (DAB) with conventional dual-phase-shift (DPS) control exhibits large variations of currents, losses, and efficiencies if there is a small change of outer phase shift ratio, which is caused by the change of command to adjust power transmission. This is mainly because of the narrow operation region of outer phase shift ratio if the conventional DPS modulation is used. To solve this problem, a novel DPS control with bidirectional inner phase shifts for the DAB is developed to reduce the current surge in the high-frequency transformer, which can stabilize the output power with high efficiency. From the analysis of operation modes and power characteristics of the proposed DPS control, it is shown that due to wider operation region of outer phase shift ratios compared with the conventional DPS control in which the inner phase shifts of both the primary and secondary H-bridges are in the same direction, lower surge current can be obtained in the change of phase shift command, which results in stable power transmission particularly at light load without scarifying the efficiency. Moreover, the DAB of using the proposed DPS control can transmit bidirectional energy with the inner and outer shift ratios of 0-1. For experimental verifications, the test results are also presented in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Cited by
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Circulating Current and ZVS-on of a Dual Active Bridge DC-DC Converter: A Review
Shao, S., Chen, H., Wu, X., Zhang, J., & Sheng, K. (2019) · IEEE Access · doi:10.1109/access.2019.2911009 · Cited by 200
“It is possible to shift g2 and g4 to different directions to obtain the same D1 and D2 [42].”
Background
Metadata
- Authors
- Liu, X., Zhu, Z. Q., Stone, D. A., Foster, M. P., Chu, W. Q., Urquhart, I., & Greenough, J.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-05
- Volume
- 32
- Issue
- 5
- Pages
- 4095-4106
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2496251258
- Cited by
- 176
- References
- 1
- FWCI
- 4.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.