Isolated Modular Multilevel DC–DC Converter With DC Fault Current Control Capability Based on Current-Fed Dual Active Bridge for MVDC Application
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this paper, a current-fed modular multilevel dual-active-bridge (CF-MDAB) dc-dc converter is proposed for medium-voltage dc (MVDC) application. The proposed converter inherits favorite characteristics of DAB circuits including soft switching and small passive components. Thereby, high efficiency and high power density can be achieved. Moreover, with direct input and output dc current control, the CF-MDAB is suitable for a breakerless MVDC system since it can realize dc fault ride-though operation. In addition, the dv/dt in the converter is mitigated with the quasi-three-level modulation. In this paper, the proposed converter is applied to integrate the battery energy storage to a MVDC grid as an example to illustrate its operation principles and fault current control capability. The operation principles are presented for both normal and dc fault conditions; the dynamic models are also derived not only under normal operation mode but under dc fault operation mode as well. The control systems under different operation modes are designed, respectively, based on the developed mathematical models. A downscaled 40-kHz 3-kW CF-MDAB prototype was built in the laboratory. The experimental results under both normal condition and dc fault condition verified the analysis as well as the control performance of the proposed converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Cited by
Review on Advanced Control Technologies for Bidirectional DC/DC Converters in DC Microgrids
Xu, Q., Vafamand, N., Chen, L., Dragicevic, T., Xie, L., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2978064 · Cited by 439
Xu, L., Guerrero, J., Lashab, A., Wei, B., Bazmohammadi, N., Vasquez, J., & Abusorrah, A. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3128417 · Cited by 262
“At present, the research topics of DAB mainly focus on topology operation, the basic characteristics, expanding the soft-switching range, redundancy design, and control methods [109].”
BackgroundIsolated and Nonisolated DC-to-DC Converters for Medium-Voltage DC Networks: A Review
Alhurayyis, I., Elkhateb, A., & Morrow, J. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3028057 · Cited by 224
“They should provide high step-up ratio, electrical isolation, FTC, high efficiency and high power density, and implement the maximum-power-point tracking (MPPT) [4], [86], [91], [102]–[105].”
BackgroundMethodInfluentialZheng, L., Kandula, R. P., & Divan, D. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3101482 · Cited by 85
High Frequency Transformer Design for Medium Voltage Shipboard DC-DC Converter
Agarwal, R., Martin, S., Shi, Y., & Li, H. (2019) · 2019 IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests.2019.8847922 · Cited by 12
“(1) with peak voltage at N*Vc, the second level at (N1)*Vc and the third level at (N-2)*Vc [4] [5] [6].”
BackgroundSelf-citation
Metadata
- Authors
- Shi, Y., & Li, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-03
- Volume
- 33
- Issue
- 3
- Pages
- 2145-2161
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2609064953
- Cited by
- 127
- References
- 1
- FWCI
- 5.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Isolated Modular Multilevel DC–DC Converter With DC Fault Current Control Capability Based on Current-Fed Dual Active Bridge for MVDC Application. https://app.cochat.ai/papers/10.1109/tpel.2017.2695575
- The paper
- Shi, Y., & Li, H. (2018). Isolated Modular Multilevel DC–DC Converter With DC Fault Current Control Capability Based on Current-Fed Dual Active Bridge for MVDC Application. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2017.2695575
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.