Current Profile Optimization for Combined State of Charge and State of Health Estimation of Lithium Ion Battery Based on Cramer–Rao Bound Analysis
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Online State of Charge (SoC) and State of Health (SoH) estimations are essential for efficient, safe, and reliable operation of Lithium ion batteries. Based on the first-order equivalent-circuit model (ECM), a multi-scale extended Kalman filter is adopted in this paper to estimate ECM parameters and battery SoC using dual time scales. The nature of the battery excitations significantly influences the estimation performance. When the input-output data, i.e., the input current and output voltage, is insufficiently rich in frequency content, the estimation performance is poor. Thus, the excitation current should be optimized for the accurate estimation of parameters and states. A Cramer-Rao bound analysis is conducted considering voltage noise, current amplitude, and current frequency, which shows the loss of accuracy in multi-parameter estimation (estimating all states and parameters) when compared to single-parameter estimation (estimating only one parameter/state). However, it also shows that the loss of accuracy can be significantly reduced when the excitation current is carefully chosen to satisfy certain criteria. Both simulation and experimental results verify the analysis results and show that a current profile with optimal frequency components achieves the best estimation performance, thereby, providing guidelines for designing battery current profiles for improved SoC and SoH estimation performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“ECM has been extensively investigated for battery monitoring and management due to its simplicity and adequate fidelity in many applications [8].”
BackgroundExtended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 15×
“A multi-scale EKF is adopted to estimate battery parameters and states using dual time scales.”
MethodInfluentialNg, K. S., Moo, C.-S., Chen, Y.-P., & Hsieh, Y.-C. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.021 · Cited by 1,636 · cited 1×
“where the battery current is numerically integrated over time to quantify the change of stored charge [9].”
BackgroundHan, X., Ouyang, M., Lu, L., Li, J., Zheng, Y., & Li, Z. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.029 · Cited by 822 · cited 1×
“tion and parameter estimation are tightly interconnected when model-based approaches are used [3].”
MethodA review on prognostics and health monitoring of Li-ion battery
Zhang, J., & Lee, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.101 · Cited by 792
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677 · cited 19×
“Commonly used models for SoC and SoH estimations include the open-circuit voltage (OCV) model [4], neural-network model [5], equivalent-circuit model (ECM) [6], and electrochemical model [7].”
MethodInfluentialWei, J., Dong, G., & Chen, Z. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782224 · Cited by 643 · cited 1×
“The SoC under load can be modeled as [35]”
BackgroundSun, F., Hu, X., Zou, Y., & Li, S. (2011) · Energy · doi:10.1016/j.energy.2011.03.059 · Cited by 614
Weng, C., Cui, Y., Sun, J., & Peng, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.012 · Cited by 561
Self-citation
Cited by
Battery Health Prediction Using Fusion-Based Feature Selection and Machine Learning
Hu, X., Che, Y., Lin, X., & Onori, S. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3017090 · Cited by 379
Data-Driven Battery State of Health Estimation Based on Random Partial Charging Data
Deng, Z., Hu, X., Li, P., Lin, X., & Bian, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3134701 · Cited by 359
Li, D., Zhang, Z., Liu, P., Wang, Z., & Zhang, L. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3008194 · Cited by 345
Yang, N., Song, Z., Hofmann, H., & Sun, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2021.103857 · Cited by 276
Self-citationXia, Z., & Qahouq, J. A. A. (2021) · IEEE Access · doi:10.1109/access.2021.3092743 · Cited by 64
Metadata
- Authors
- Song, Z., Wu, X., Li, X., Sun, J., Hofmann, H. F., & Hou, J.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-07
- Volume
- 34
- Issue
- 7
- Pages
- 7067-7078
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2901332649
- Cited by
- 75
- References
- 12
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Current Profile Optimization for Combined State of Charge and State of Health Estimation of Lithium Ion Battery Based on Cramer–Rao Bound Analysis. https://app.cochat.ai/papers/10.1109/tpel.2018.2877294
- The paper
- Song, Z., Wu, X., Li, X., Sun, J., Hofmann, H. F., & Hou, J. (2019). Current Profile Optimization for Combined State of Charge and State of Health Estimation of Lithium Ion Battery Based on Cramer–Rao Bound Analysis. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2018.2877294
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.