Optimal Phase-Shift Control to Minimize Reactive Power for a Dual Active Bridge DC–DC Converter
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In a dual active bridge (DAB) dc-dc converter, modulating the phase-shift ratios can suppress reactive power and increase the efficiency under non-unity voltage gain conditions. Derivation of the optimal phase-shift ratios to achieve the minimum reactive power is challenging because a DAB can operate in four different scenarios (forward/backward, buck/boost) and each scenario has five operating modes. This paper first introduces a transformation in which different DAB operating scenarios (forward/backward, buck/boost) can be equivalent to one another; then optimization of only one scenario (forward/buck) is required. Next, for the five modes in forward/buck scenario, based on a graphical method, this paper proves that each operating point of Modes 1, 2, and 5 can be mapped into that of Mode 3 with lower conduction losses, and only two modes require detailed analysis. The optimization process of these two modes are derived step-by-step. Global optimal phase-shift signals that minimize the reactive power under four different DAB operating scenarios (forward/backward, buck/boost) are presented. A simple table and control block diagram are presented for practical implementation of global reactive-power minimization control. Experimental comparison with other modulation schemes verifies the efficiency improvement of the proposed control method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932
Cited by
Modeling and Advanced Control of Dual-Active-Bridge DC–DC Converters: A Review
Shao, S., Chen, L., Shan, Z., Gao, F., Chen, H., Sha, D., & Dragičević, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108157 · Cited by 488
Self-citationCirculating Current and ZVS-on of a Dual Active Bridge DC-DC Converter: A Review
Shao, S., Chen, H., Wu, X., Zhang, J., & Sheng, K. (2019) · IEEE Access · doi:10.1109/access.2019.2911009 · Cited by 200
“DAB operating modes, Mode 1, Mode 2-4, and Modes 5 are differentiated by v ′ cd rising edge [55], [56], [61].”
BackgroundInfluentialSelf-citationMa, X., Wang, P., Bi, H., & Wang, Z. (2020) · IEEE Access · doi:10.1109/access.2020.3007638 · Cited by 48
Metadata
- Authors
- Shao, S., Jiang, M., Ye, W., Li, Y., Zhang, J., & Sheng, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-10
- Volume
- 34
- Issue
- 10
- Pages
- 10193-10205
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2908140460
- Cited by
- 221
- References
- 1
- FWCI
- 7.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.