Active Model-Based Fault Diagnosis in Reconfigurable Battery Systems
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
With the increasing demand for electric vehicles, the interest in battery systems is growing. In order to enable safe operation of these complex energy storage systems, methods of fault diagnosis are needed. Particularly, reconfigurable battery systems (RBSs) with switches are promising on the way to fault tolerance as they allow the system to be reconfigured in the event of a fault. In this article, a model-based fault diagnosis algorithm is developed and validated that uses the switches of an RBS to improve the fault isolability. Since the algorithm changes the structure of the system in order to differentiate between nonisolable faults, it is classified as an active fault diagnosis algorithm. The deviations between sensor measurements and model, called residuals, are stochastically analyzed. For fault isolation, a fuzzy clustering approach is used. A constrained sigma-point Kalman filter minimizes model uncertainties and therefore increases the sensitivity and robustness of the fault diagnosis approach. Furthermore, the filter allows estimating the fault amplitude in case of a fault. Based on active sequential hypothesis testing, a policy to calculate the next switch position is proposed and investigated. It is shown simulatively and experimentally that additional faults are isolated by the presented active approach.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Liu, Z., Ahmed, Q., Zhang, J., Rizzoni, G., & He, H. (2016) · Control Engineering Practice · doi:10.1016/j.conengprac.2016.03.015 · Cited by 90 · cited 4×
“They are applied to a single cell [13], [15], [16] or serially connected cells [17], [19], [20] with the assumption that cells connected in parallel behave like one large cell.”
BackgroundInfluential
Cited by
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Waseem, M., Ahmad, M., Parveen, A., & Suhaib, M. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233349 · Cited by 288
Chen, Z., Zhang, Y., Liu, C., Yang, R., & Chen, G. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3350878 · Cited by 18
Metadata
- Authors
- Schmid, M., Gebauer, E., Hanzl, C., & Endisch, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-03
- Volume
- 36
- Issue
- 3
- Pages
- 2584-2597
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3046875737
- Cited by
- 166
- References
- 2
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active Model-Based Fault Diagnosis in Reconfigurable Battery Systems. https://app.cochat.ai/papers/10.1109/tpel.2020.3012964
- The paper
- Schmid, M., Gebauer, E., Hanzl, C., & Endisch, C. (2021). Active Model-Based Fault Diagnosis in Reconfigurable Battery Systems. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2020.3012964
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.