The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
A Postfault Strategy to Control the Modular Multilevel Converter Under Submodule Failure
Abstract
The modular multilevel converter (MMC) has become one of the most promising topologies for high-voltage applications. Although the MMC has a modular and redundant structure, which can significantly enhance its reliability and fault tolerance, its fault handling capability can be further improved by adopting a postfault strategy. In this paper, a postfault strategy based on the neutral-shift method is proposed, which, subsequent to bypassing the faulty submodule(s), aims at improving the maximum attainable line-to-line voltages of the MMC. Based on a newly developed internal variable analysis method, the impact of the neutral-shift strategy on the operation of the MMC is analyzed. In conjunction with the proposed postfault strategy, a modified circulating current suppression (CCS) method is used to mitigate the double-frequency component of the circulating currents. Performance and effectiveness of the proposed neutral-shift strategy with and without the CCS method is evaluated based on time-domain simulation studies in the PSCAD/EMTDC software environment.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Voltage‐Sourced Converters in Power Systems: Modeling, Control, and Applications
Yazdani, A., & Iravani, R. (2010) · Wiley eBooks · doi:10.1002/9780470551578 · Cited by 2,264
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 2×
“The basics of operation of the MMC have been described in [1] and are not repeated here.”
BackgroundSelf-citationTu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 5×
“Therefore, based on the CCS method in [25], the negative- and positive-sequence current controllers can be constructed based on the block diagram of Fig.”
MethodInfluentialDynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 1×
“In (1), and are generated by the closed-loop control system [26].”
BackgroundSelf-citationVoltage-Sourced Converters in Power Systems : Modeling, Control, and Applications
Yazdani, A., & Iravani, R. (2010) · Cited by 831
New transformerless, scalable Modular Multilevel Converters for HVDC-transmission
Allebrod, S., Hamerski, R., & Marquardt, R. (2008) · 2008 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2008.4591920 · Cited by 785
Marquardt, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5544594 · Cited by 773
Ilves, K., Antonopoulos, A., Norrga, S., & Nee, H.-P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159809 · Cited by 578 · cited 2×
“Although a few methods have been proposed to analyze the internal variables of the MMC [16]–[18], none of them is applicable to the analysis of the MMC under postfault operation with the neutral-shift strategy, since all of the existing methods are based on the assumption of the three-phase symmetric MMC system.”
BackgroundMethodGuan, M., & Xu, Z. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192752 · Cited by 549 · cited 1×
“Operation and control of the MMC under unbalanced grid conditions have been studied and investigated in [19]–[24].”
BackgroundA Steady-State Analysis Method for a Modular Multilevel Converter
Song, Q., Liu, W., Li, X., Rao, H., Xu, S., & Li, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227818 · Cited by 503
Research works printed but not linked: 1
- dorn, 2007, Novel voltage-sourced converters for HVDC and FACTS applications, Proc CIGRE Osaka Symp
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“with suppressing the circulating current to mitigate the double frequency current that appears in the arms [121].”
BackgroundFault-Tolerant Control of MMC With Hot Reserved Submodules Based on Carrier Phase Shift Modulation
Li, K., Yuan, L., Zhao, Z., Lu, S., & Zhang, Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2628762 · Cited by 137
“In analogy to the fault-tolerant operation in the cascaded H-bridge converter, a postfault strategy for MMC based on the neutral-shift was provided in [21], which guarantees the desired line-to-line voltage.”
MethodOn Grid-Interactive Smart Inverters: Features and Advancements
Mirafzal, B., & Adib, A. (2020) · IEEE Access · doi:10.1109/access.2020.3020965 · Cited by 154
Xiao, Q., Jin, Y., Jia, H., Tang, Y. K., Cupertino, A. F., Mu, Y., Teodorescu, R., Blaabjerg, F., & Pou, J. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3283286 · Cited by 139
“The FF-ZSV injection-based fault-tolerant control method in [111] is defined as Method 4.”
BackgroundMethodZhou, D., Yang, S., & Tang, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2863181 · Cited by 88
“The cost function of MMCs can be written as J = λ1(i∗c − ic(k + 1))2 + λ2(i∗o − io(k + 1))2 + N∑ i=1 (u∗c − uc,u,i(k + 1))2 + N∑ i=1 (u∗c − uc,l,i(k + 1))2 (35) where λ1 and λ2 are weighting factors that determine the importance of different objectives when selecting the optimal switching combination. u∗c is the capac…”
BackgroundInfluentialModulated Model Predictive Control of Modular Multilevel Converters in VSC-HVDC Systems
Mahmoudi, H., Aleenejad, M., & Ahmadi, R. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2727478 · Cited by 79
“Although considerable research effort has been devoted to implementation of FCS-MPC for MMCs recently [21]–[24], to the best of authors’ knowledge, little to no effort has been made to develop a M2PC method for MMC control.”
BackgroundInfluentialApplication of Third-Order Harmonic Voltage Injection in a Modular Multilevel Converter
Guo, G., Song, Q., Yang, W., Wang, Y., Liu, W., Rao, H., & Xu, S. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2777413 · Cited by 74
“The circulating current will be produced because the reference voltage is unequal to the output voltage in the arm [32]–[34].”
InfluentialFarzamkia, S., Iman‐Eini, H., Noushak, M., & Hadizadeh, A. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2823659 · Cited by 61
“In [7] and [19], the possibility of using the NS method in the MMC has been investigated.”
BackgroundMethodInfluentialLi, B., Xu, Z., Ding, J., & Xu, D. (2018) · IEEE Access · doi:10.1109/access.2018.2811904 · Cited by 57
“However, in [31], not only the faulty SMs but also the same number of healthy SMs in the other arm are bypassed to maintain symmetrical operation between the upper and lower arms, which leads to reduced reliability since extra redundant SMs are wasted.”
BackgroundInfluentialKurtoğlu, M., Eroğlu, F., Arslan, A. O., & Vural, A. M. (2018) · International Transactions on Electrical Energy Systems · doi:10.1002/etep.2763 · Cited by 57
On Converter Fault Tolerance in MMC-HVDC Systems: A Comprehensive Survey
Farias, J. V. M., Cupertino, A. F., Pereira, H. A., Seleme, S. I., & Teodorescu, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3032393 · Cited by 55
“The NS method adjusts the angles between the phase voltages in such a way that all the healthy submodules are utilized, the line-to-line voltages are balanced, and the amplitude of line voltages is maximized [49], [50].”
MethodXiao, H., Gan, H., Yang, P., Li, L., Li, D., Hao, Q., Huang, Y., Dai, L., & Liu, Y. (2023) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2023.3343693 · Cited by 54
“On the other hand, the hot RSM-based method involves utilizing all SMs for modulation in both normal and fault states [33].”
BackgroundMethodAleenejad, M., Mahmoudi, H., Jafarishiadeh, S., & Ahmadi, R. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2860518 · Cited by 49
“for the MLC, however, only a few of them are suitable for MMCs [8], [12].”
BackgroundModular Multilevel Converter-Based Microgrid: A Critical Review
Bashir, S. B., Ismail, A. A. A., Elnady, A., Farag, M. M., Hamid, A.-K., Bansal, R. C., & Abo-Khalil, A. G. (2023) · IEEE Access · doi:10.1109/access.2023.3289829 · Cited by 57
“In [162], the NPS is realized by altering the references of three-phase voltages.”
BackgroundMethodEnhancing the Reliability of Modular Multilevel Converters Using Neutral Shift
Kucka, J., Karwatzki, D., & Mertens, A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2695327 · Cited by 43
“[5] applying the neutral shift to the ac side was published, with regard to”
MethodNext generation power inverter for grid resilience: Technology review
Hossain, M. S., Hossen, M. Z., Badal, F. R., Islam, M. R., Hasan, M., Ali, M. F., Ahamed, M. H., Abhi, S. H., Islam, M. M., Sarker, S. K., et al. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e39596 · Cited by 61
Zhou, D., Tu, P., Qiu, H., & Tang, Y. K. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2911959 · Cited by 43
“Several FT control schemes based on the neutral shift have been developed to improve the maximum attainable line-to-line voltages of the MMC [23], [24].”
BackgroundDong, Y., Yang, H., Li, W., & He, X. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2833019 · Cited by 39
“8(a), where the MMC neutral point is shifted from O2 to N by adding a zero-sequence voltage uNO (the red solid line) [34], [35].”
BackgroundInfluentialXiao, Q., Wang, J., Jin, Y., Chen, L., Jia, H., Dragičević, T., & Teodorescu, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2967576 · Cited by 37
“Compared with the conventional ZSV injection faulttolerant method in [24], the proposed method has a higher fault-tolerant capability and does not need carrier configuration.”
MethodKang, J., Kim, H., Jung, H.-J., Lee, D. S., Kim, C., Mantooth, H. A., & Hur, K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2846406 · Cited by 36
Farzamkia, S., Noushak, M., Iman‐Eini, H., Sadigh, A. K., & Farhangi, S. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2991998 · Cited by 30
“The neutral shift (NS) method utilizes the unbalanced phase voltages to generate the balanced line-to-line voltages [20], [23], [29].”
InfluentialCondition Health Monitoring of Modular Multilevel Converter Submodule Capacitors
Polanco, I., & Dujić, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3118602 · Cited by 30
Zhang, L., Zhang, Z., Qin, J., Shi, D., & Wang, Z. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558443 · Cited by 27
Self-citationYin, J., Wu, W., Wei, T., Wu, X., & Huo, Q. (2018) · Energies · doi:10.3390/en12010020 · Cited by 25
“The advantage of these methods in [15,21] is that they do not need to adjust the SM capacitor voltages in fault arms.”
MethodGeng, Z., & Han, M. (2020) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2020.2987957 · Cited by 24
“In [8], the clustering algorithm (CA) and the calculated capacitance (CC) method are proposed for the fault diagnosis.”
MethodCui, S., Hu, J., & Doncker, R. D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911853 · Cited by 24
“The FTO methods of the MMC include the hot-reserving redundant SM concept [7]–[11], cold-reserving redundant SM concept [12], and the neutral shift concept [14]– [16], which is similar to the FTO method utilized in cascade”
MethodJin, Y., Xiao, Q., Pou, J., Jia, H., Ji, Y., Teodorescu, R., & Blaabjerg, F. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3151911 · Cited by 23
“59 For the VRA-based methods, the fundamental fre- 60 quency zero-sequence voltage (FF-ZSV) injection is usually 61 applied [11].”
MethodFarzamkia, S., Iman‐Eini, H., Sadigh, A. K., & Noushak, M. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3022984 · Cited by 23
“On contrary to the NS and CDCNS methods [9], [25], [30], [32], the angle between the phase voltages in the proposed method remains 120 ◦ .”
BackgroundMethodInfluentialLi, J., Wu, X., Yao, X., Jing, L., Jin, X., Wu, W., Wang, X., & Wang, S. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854809 · Cited by 16
“The neutral-shift strategy is proposed in [4].”
Li, W., Yang, H., Sheng, J., Li, C., Chen, M., He, X., & Gu, X. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2921795 · Cited by 16
“When a submodule fault occurs, the corresponding thyristor would turn on and keep the fault submodule bypassed [31].”
BackgroundWu, W., Wu, X., Yin, J., Jing, L., Wang, S., & Li, J. (2017) · Energies · doi:10.3390/en10111827 · Cited by 16
Zang, J., Wang, J., Zhang, J., & Zhou, J. (2019) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2019.8781398 · Cited by 14
“In [11], the redundant SMs are not fully used during normal operation.”
BackgroundNguyen, M. H., & Kwak, S. (2020) · IEEE Access · doi:10.1109/access.2020.3048156 · Cited by 14
“An indispensable characteristic of the MMC is its high reliability [7], which allows operation despite the presence of faulty SMs via fault-tolerant methods [8]–[10].”
BackgroundXu, K., Xie, S., Wang, X., Zhang, B., & Bian, S. (2018) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590218 · Cited by 13
“A control strategy based on neutral-shift method are proposed in [7], but it is only suitable for three-phase three-wire power system.”
BackgroundMethodLi, M., Jiang, X., Chen, C., Zhang, K., & Xiong, J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3390421 · Cited by 14
“To obtain the desired boost in line voltages, the initial amplitudes of u acref j ( j = 1, 2, and 3) are multiplied by h (set to 1.11 in this case, since U 1 + U 2 = 3.5 U SM , and U NS = 3.153 U SM according to the work in [19]), thus leading to the overmodulation in Fig.”
BackgroundMethodInfluentialWang, C., Zheng, Z., Wang, K., & Li, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3146249 · Cited by 12
Wang, Z., Yin, X., & Chen, Y. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108048 · Cited by 11
Liu, Z., Miao, S., Fan, Z., Kanɡ, Y., & Tu, Q. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.03.010 · Cited by 9
Geng, Z., Yang, Y. B., Xiao, Y., & Xie, W. (2024) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2024.3414301 · Cited by 8
“The FT in [8] further improves the methods in [6], [7] based on neutral shift.”
BackgroundMethodA Novel Open-Circuit Fault-Tolerant MMC with Multi-carrier PWM Techniques for Solar PV Applications
Madhuri, K. M., Latha, M., Rao, P. M., Venkataramana, C., Thrinath, B. V. S., & Bi, S. R. (2024) · International Journal of Electrical and Electronics Research · doi:10.37391/ijeer.120306 · Cited by 7
Zolfagharian, O., Dastfan, A., & Marzebali, M. H. (2021) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3178 · Cited by 7
DC Voltage Control and OLTC Control Strategy for MMC-Based HVDC System Under SM Failure
Richa, A., Beig, A. R., & Jayashree, R. (2021) · IEEE Access · doi:10.1109/access.2021.3102377 · Cited by 8
Li, J., & Yin, J. (2019) · Energies · doi:10.3390/en12091726 · Cited by 7
Submodule fault-tolerant control based adaptive carrier-PDPWM for modular multilevel converters
Elsanabary, A., Hashfi, T. B., Mekhilef, S., Seyedmahmoudian, M., & Stojcevski, A. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.10.074 · Cited by 7
MMC‐HVDC AC side line protection based on positive sequence fault component current ratio
Huang, H., & Wang, Z. (2023) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12979 · Cited by 5
Resilient Operation for Grid-Connected Cascaded H-Bridge Multilevel Inverter Based on Neutral Offset
Zhu, J., Li, Y., Lehman, B., & Peng, F. Z. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3589466 · Cited by 4
“In [10], the neutral point is shifted by dynamically calculating the voltage reference angle from the maximum available output voltage of each phase after a fault.”
Fast and fault‐tolerant model predictive control of MMCs under selective harmonic elimination
Mohammadhassani, A., & Mehrizi‐Sani, A. (2022) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12679 · Cited by 3
Fault-Tolerant Method of Modular Railway Power Conditioner Based on DC Bus Voltage Regulation
Ding, H., Ma, F., Han, R. G., Zhang, C., & Wong, M. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3285987 · Cited by 3
“The other method is the neutral point shift fault-tolerant control [19], [20], [21], which realizes the maximum output line voltage by selecting the amplitude and phase angle of the phase voltage of the healthy phase leg.”
MethodOperation of MMC Based Unipolar HVDC Under SM Failure
Richa, R., Beig, A. R., Dekka, A., & Jayashree, R. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8927428 · Cited by 2
“These use redundant additional SM units in each arm of three-phases of MMC either as hot reserve [13], [14], [18], [20] or active hot reserve [4], [16], [21], [22] or cold reserve [11].”
MethodFPGA implementation of open-loop controller for five-level three phase modular multilevel converter
Fatunmbi, R. O., Okoye, O., Lasabi, O. A., & Davidson, I. E. A. (2017) · IEEE AFRICON · doi:10.1109/afrcon.2017.8095677 · Cited by 2
Zhao, Z., & Han, M. (2025) · IET Power Electronics · doi:10.1049/pel2.70095 · Cited by 1
Zhu, J., Li, Y., Lehman, B., & Peng, F. Z. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3678276 · Cited by 2
“Direct adjustment of reference angles based on maximum available phase voltage, as in [19], also incurs high computational cost.”
Raja, M. M., Wang, H., Kish, G. J., & Zhao, Q. Z. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3691497 · Cited by 1
“Meanwhile, the VB-NS methods determine the reference phase angles between phases to ensure balanced line-line voltages during the postfault operation [30].”
Zhou, D., Yang, S., & Tang, Y. K. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557902 · Cited by 1
“By considering the arm voltages as a whole, the predictive model of MMCs can be rewritten as ik+1o = i k o + ( −Ra + 2Rl La + 2Ll io + uo La + 2Ll ) Ts, (3) ik+1c = i k c + ( −Ra La ic + uc 2La ) Ts, (4) where uo and uc are the arm voltage combinations listed in Table I.”
BackgroundInfluentialControl Aspects of Multifunctional Converters in AC Microgrids: A Survey
Soni, N., Umarikar, A. C., & Vijay, A. S. (2025) · IEEE Access · doi:10.1109/access.2025.3573154 · Cited by 1
“…realm of ancillary services, several critical aspects come to the forefront, including reactive power compensation [9], [10], [11], [12], [13], [14], [15], enhancement of power quality [16], [17], fault ride-through capability [18], [19], [20], [21], [22], and voltage ride-through capability [23].”
Operation of MMC Based HVDC Under SM Failure at Sending End Converter
Richa, R., Beig, A. R., Jaafari, K. A. A., & Jayashree, R. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913266 · Cited by 1
“In recent years, several research works are reported on the fault tolerant operation (FTO) of MMC under SM failure [14-28].”
BackgroundA Fault-Tolerant Approach for Hybrid Modular Multilevel Converter Using Negative Voltage Levels
Farzamkia, S., Sadigh, A. K., & Dargahi, V. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487238
Bai, Z., & Li, Y. (2022) · Energies · doi:10.3390/en15155694
Fault‐Tolerant Converter Design for Photovoltaic System
Malik, A., & Haque, A. (2022) · Wiley eBooks · doi:10.1002/9781119873785.ch8
Khaleghi, M., & Biglo, A. H. A. (2023) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc57673.2023.10087096
“Another solution is shifting the neutral point position to obtain the maximum balanced line voltage [17].”
BackgroundMethodA Review of Modular Multilevel Converters and Its Applications
Kumar, D., Jena, K., Tandekar, J. K., Dewangan, N. K., & Rathore, V. (2024) · doi:10.1002/9781394167371.ch16
Analysis and Control of MMC with Zero-sequence Injection Fault-tolerant Strategy
Li, M., Jiao, J., & Zhang, K. (2024) · Power System and Green Energy Conference (PSGEC) · doi:10.1109/psgec62376.2024.10721175
“The injected zero-sequence components usually include dc, fundamental frequency [6], and third-order harmonic [7] [8] [9].”
BackgroundA Novel Open-Circuit Fault-Tolerant Operation for Modular Multilevel Converters
Kumar, D., Bakka, V., Jena, K., Dinesh, C. H., Janardhan, K., & Kumar, B. H. (2024) · Advanced technologies and societal change · doi:10.1007/978-981-99-2832-3_33
Wang, H., Chen, M., Li, G., Zheng, M., & Hu, C. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3543535
“A method of injecting zero sequence voltage (ZSV) after bypassing the faulty module was proposed in [30] and [31], this method can avoid the rise of capacitor voltage and the configuration of redundant submodules.”
Rojas, A., Díaz, M., Rodríguez, J., Pizarro, P., Cárdenas, R., & Arias-Esquivel, Y. (2024) · IEEE Central America and Panama Convention (CONCAPAN) · doi:10.1109/concapan63470.2024.10933843
“Despite the inherent fault tolerance of MMCCs [2], [5], [7], literature on this topic remains limited, primarily focusing on the Modular Multilevel Converter ( M 2 C ) [11], [12].”
Geng, Z., Yu, Y., Yang, Y. B., Xiao, Y., Xie, W., & Zhou, G. (2026) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2026.3656371
Saleem, M. H., Amin, A. A., Alqarni, Z. A., & Shahzad, U. (2026) · Engineering Reports · doi:10.1002/eng2.70824 · Cited by 2
“The arms of [ 172, 173] are equipped with both hot-reserve and cold-reserve redundant SMs.”
Yao, F., Guo, C., & Sun, L. (2026) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.70581
Metadata
- Authors
- Yang, Q., Qin, J., & Saeedifard, M.
- Affiliations
- Georgia Institute of Technology (US)
- Arizona State University (US)
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2016-12
- Volume
- 31
- Issue
- 6
- Pages
- 2453-2463
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2524399879
- Cited by
- 69
- References
- 30
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 8 · 2023: 6 · 2022: 6 · 2021: 6 · 2020: 7 · 2019: 8 · 2018: 11 · 2017: 5 · 2016: 2
- FWCI
- 2.89
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Delivery (publishedVersion)
- Funders
- National Science Foundation (1443814)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- modular multilevel converter, line voltage, circulating current suppression, fault tolerance, high-voltage converters
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.