The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
An Improved Backward/Forward Sweep Load Flow Algorithm for Radial Distribution Systems
Abstract
This letter presents an improved backward/ forward sweep algorithm for three-phase load-flow analysis of radial distribution systems. In the backward sweep, Kirchhoff's Current Law and Kirchhoff's Voltage Law are used to calculate the upstream bus voltage of each line or a transformer branch. Then, the linear proportional principle is adopted to find the ratios of the real and imaginary components of the specified voltage to those of the calculated voltage at the substation bus. In the forward sweep, the voltage at each downstream bus is then updated by the real and imaginary components of the calculated bus voltage multiplying with the corresponding ratio. The procedure stops after the mismatch of the calculated and the specified voltages at the substation is less than a convergence tolerance. The proposed algorithm is tested with three IEEE benchmark distribution systems. Results show that the algorithm is accurate and computationally efficient in comparing with two other commonly used methods
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Radial distribution test feeders
Kersting, W. H. (1991) · IEEE Transactions on Power Systems · doi:10.1109/59.119237 · Cited by 1,888
Distribution System Modeling and Analysis
Kersting, W. (2012) · Electric Power Engineering Series · doi:10.1201/b12056-31 · Cited by 1,241
A compensation-based power flow method for weakly meshed distribution and transmission networks
Shirmohammadi, D., Hong, H. W., Semlyen, A., & Luo, G. X. (1988) · IEEE Transactions on Power Systems · doi:10.1109/59.192932 · Cited by 1,182
Distribution System Modeling and Analysis
Denny, F., & Dismukes, D. (2001) · Electric Power Engineering Series · doi:10.1201/9781420058451 · Cited by 362
Method for load-flow solution of radial distribution networks
Ghosh, S., & Das, D. (1999) · IEE Proceedings - Generation, Transmission and Distribution · doi:10.1049/ip-gtd:19990464 · Cited by 344
Cited by
Analytic Considerations and Design Basis for the IEEE Distribution Test Feeders
Schneider, K. P., Mather, B. A., Pal, B. C., Ten, C.-W., Shirek, G. J., Zhu, H., Fuller, J. C., Pereira, J. L. R., Ochoa, L. F., de Araujo, L. R., et al. (2018) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2017.2760011 · Cited by 710
Yuan, H., Li, F., Wei, Y., & Zhu, J. (2018) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2594814 · Cited by 372
Abdelaziz, M. M. A., Farag, H. E., El-Saadany, E. F., & Mohamed, Y. A.-R. I. (2013) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2012.2195785 · Cited by 335
Devi, S., & Geethanjali, M. (2014) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2014.05.015 · Cited by 278
Mumtaz, F., Syed, M. H., Hosani, M. A., & Zeineldin, H. H. (2016) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2015.2502482 · Cited by 274
Metadata
- Authors
- Chang, G. W., Chu, S. Y., & Wang, H. L.
- Venue
- IEEE Transactions on Power Systems
- Published
- 2007-05
- Volume
- 22
- Issue
- 2
- Pages
- 882-884
- ISSN
- 0885-8950 (ISSN-L)
- OpenAlex
- W2131461075
- Cited by
- 325
- References
- 5
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.