Introducing Dynamic Demand Response in the LFC Model
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Demand response (DR) has proved to be an inevitable part of the future grid. Much research works have been reported in the literature on the benefits and implementation of DR. However, little works have been reported on the impacts of DR on dynamic performance of power systems, specifically on the load frequency control (LFC) problem. This paper makes an attempt to fill this gap by introducing a DR control loop in the traditional LFC model (called LFC-DR) for a single-area power system. The model has the feature of optimal operation through optimal power sharing between DR and supplementary control. The effect of DR communication delay in the controller design is also considered. It is shown that the addition of the DR control loop increases the stability margin of the system and DR effectively improves the system dynamic performance. Simulation studies are carried out for single-area power systems to verify the effectiveness of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Investigation of domestic load control to provide primary frequency response using smart meters
Samarakoon, K., Ekanayake, J., & Jenkins, N. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2173219 · Cited by 200
An economic welfare analysis of demand response in the PJM electricity market
Walawalkar, R., Blumsack, S., Apt, J., & Fernands, S. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.06.036 · Cited by 100
Cited by
Hui, H., Ding, Y., Shi, Q., Li, F., Song, Y., & Yan, J. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113972 · Cited by 373
Metadata
- Authors
- Pourmousavi, S. A., & Nehrir, M. H.
- Venue
- IEEE Transactions on Power Systems
- Published
- 2014-07
- Volume
- 29
- Issue
- 4
- Pages
- 1562-1572
- ISSN
- 0885-8950 (ISSN-L)
- 1558-0679
- OpenAlex
- W2162230409
- Cited by
- 181
- References
- 2
- FWCI
- 7.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.