Model Development and Identification for Fast Demand Response in Commercial HVAC Systems
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Large commercial HVAC systems are attractive targets for fast demand response (DR) applications, e.g., integrating time-intermittent renewable generation. By leveraging the communications in the building automation system (BAS) already present in most buildings, large commercial HVAC systems provide easier access to a large controllable resource than aggregating a large number of small residential loads. However, large commercial HVAC systems are complex with many variables, many end point controllers, and several internal control loops that interact with each other. In addition, the existing fleet of large commercial buildings is diverse with many different HVAC configurations and BAS architectures. Capturing these buildings as DR resources requires a method to greatly reduce the complexity of the HVAC DR control and is general and flexible enough that it can be easily deployed across the diverse fleet of existing buildings. We create such a DR control by developing a system model that uses a single state variable instead of the several hundred variables in a commercial HVAC system. The model includes a small number of system parameters, and we demonstrate how their values can be determined via system identification measurements. Finally, we test our model on a large commercial HVAC system to investigate its control performance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“while automation equipment that is already present in most large commercial buildings may be exploited in order reduce the infrastructure costs associated with the implementation of DR programs [64].”
From An overview of Demand Response: Key-elements and international experience (2017) · cites this paper as [64]
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Achieving Controllability of Electric Loads
Callaway, D. S., & Hiskens, I. A. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2081652 · Cited by 1,069
A conceptual framework for the vehicle-to-grid (V2G) implementation
Guille, C., & Gross, G. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.05.053 · Cited by 934
Callaway, D. S. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.12.012 · Cited by 759
State Estimation and Control of Electric Loads to Manage Real-Time Energy Imbalance
Mathieu, J. L., Koch, S., & Callaway, D. S. (2013) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2012.2204074 · Cited by 574
Modeling and control of thermostatically controlled loads
Kundu, S., Sinitsyn, N. A., Backhaus, S., & Hiskens, I. A. (2011) · arXiv (Cornell University) · doi:10.48550/arxiv.1101.2157 · Cited by 147
Self-citationSinitsyn, N. A., Kundu, S., & Backhaus, S. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.11.021 · Cited by 107
Self-citationMathieu, J. L., Callaway, D. S., & Kiliccote, S. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.08.020 · Cited by 93
Achieving controllability of plug-in electric vehicles
Hiskens, I. A., & Callaway, D. S. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289710 · Cited by 28
Murphy, J. P. (2011) · Cited by 28
Research works printed but not linked: 3
- 0, DOE Building Data Book
- hammerstrom, 2007, ?Pacific Northwest GridWise Testbed Demonstration Project Part I Olympic Peninsula Project ?
- 0, EnerNOC
Cited by
An overview of Demand Response: Key-elements and international experience
Paterakis, N. G., Erdinç, O., & Catalão, J. P. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.167 · Cited by 640
From concept to application: A review of use cases in urban building energy modeling
Ang, Y. Q., Berzolla, Z. M., & Reinhart, C. F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115738 · Cited by 255
Frequency Regulation From Commercial Building HVAC Demand Response
Beil, I., Hiskens, I., & Backhaus, S. (2016) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2520640 · Cited by 197
Self-citationWang, H., Wang, S., & Tang, R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.159 · Cited by 165
Robust Energy-Constrained Frequency Reserves From Aggregations of Commercial Buildings
Vrettos, E., Oldewurtel, F., & Andersson, G. (2016) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2015.2511541 · Cited by 141
Metadata
- Authors
- Goddard, G., Klose, J., & Backhaus, S.
- Affiliations
- Los Alamos National Laboratory (US)
- ORCID
- Backhaus, Scott
- Venue
- IEEE Transactions on Smart Grid
- Published
- 2014-07
- Volume
- 5
- Issue
- 4
- Pages
- 2084-2092
- ISSN
- 1949-3053 (ISSN-L)
- 1949-3061
- OpenAlex
- W2124038732
- Cited by
- 101
- References
- 11
- Citations by year
- 2025: 2 · 2024: 7 · 2023: 4 · 2022: 6 · 2021: 12 · 2020: 10 · 2019: 16 · 2018: 10 · 2017: 13 · 2016: 15 · 2015: 5 · 2014: 1
- FWCI
- 16.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Smart Grid (publishedVersion)
- Funders
- Microgrid Program of the Office of Electricity within the U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Smart Grid Energy Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Integrated Energy Systems Optimization
- Keywords
- building automation, system identification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model Development and Identification for Fast Demand Response in Commercial HVAC Systems. https://app.cochat.ai/papers/10.1109/tsg.2014.2312430
- The paper
- Goddard, G., Klose, J., & Backhaus, S. (2014). Model Development and Identification for Fast Demand Response in Commercial HVAC Systems. IEEE Transactions on Smart Grid. https://doi.org/10.1109/tsg.2014.2312430
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.