The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Storage Size Determination for Grid-Connected Photovoltaic Systems
Open accessAbstract
In this paper, we study the problem of determining the size of battery storage used in grid-connected photovoltaic (PV) systems. In our setting, electricity is generated from PV and is used to supply the demand from loads. Excess electricity generated from the PV can be either sold back to the grid or stored in a battery, and electricity must be purchased from the electric grid if the PV generation and battery discharging cannot meet the demand. Due to the time-of-use electricity pricing and net metered PV systems, electricity can also be purchased from the grid when the price is low, and be sold back to the grid when the price is high. The objective is to minimize the cost associated with net power purchase from the electric grid and the battery capacity loss while at the same time satisfying the load and reducing the peak electricity purchase from the grid. Essentially, the objective function depends on the chosen battery size. We want to find a unique critical value (denoted asCrefc) of the battery size such that the total cost remains the same if the battery size is larger than or equal toCrefc, and the cost is strictly larger if the battery size is smaller thanCrefc. We obtain a criterion for evaluating the economic value of batteries compared to purchasing electricity from the grid, propose lower and upper bounds onCrefc, and introduce an efficient algorithm for calculating its value; these results are validated via simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Cited by
Battery energy storage system size determination in renewable energy systems: A review
Yang, Y., Bremner, S., Menictas, C., & Kay, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.047 · Cited by 977
Optimization of hybrid renewable energy power systems: A review
Bhandari, B., Lee, K.-T., Lee, G.-Y., Cho, Y.-M., & Ahn, S.-H. (2015) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-015-0013-z · Cited by 384
Wang, Y., Tan, K. T., Peng, X. Y., & So, P. L. (2016) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2462723 · Cited by 349
Alam, M. J. E., Muttaqi, K. M., & Sutanto, D. (2013) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2013.2259269 · Cited by 330
Hybrid renewable microgrid optimization techniques: A review
Dawoud, S. M., Lin, X., & Okba, M. I. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.007 · Cited by 326
Metadata
- Authors
- Ru, Y., Kleissl, J., & Martinez, S.
- Venue
- IEEE Transactions on Sustainable Energy
- Published
- 2013-01
- Volume
- 4
- Issue
- 1
- Pages
- 68-81
- ISSN
- 1949-3029 (ISSN-L)
- 1949-3037
- OpenAlex
- W2039392443
- Cited by
- 353
- References
- 1
- FWCI
- 16.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.