The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Sensorless Battery Internal Temperature Estimation Using a Kalman Filter With Impedance Measurement
Open accessAbstract
This study presents a method of estimating battery- cell core and surface temperature using a thermal model coupled with electrical impedance measurement, rather than using direct surface temperature measurements. This is advantageous over previous methods of estimating temperature from impedance, which only estimate the average internal temperature. The performance of the method is demonstrated experimentally on a 2.3-Ah lithium-ion iron phosphate cell fitted with surface and core thermocouples for validation. An extended Kalman filter (EKF), consisting of a reduced-order thermal model coupled with current, voltage, and impedance measurements, is shown to accurately predict core and surface temperatures for a current excitation profile based on a vehicle drive cycle. A dual-extended Kalman filter (DEKF) based on the same thermal model and impedance measurement input is capable of estimating the convection coefficient at the cell surface when the latter is unknown. The performance of the DEKF using impedance as the measurement input is comparable to an equivalent dual Kalman filter (DKF) using a conventional surface temperature sensor as measurement input.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“A commonly employed expression for the heat source in a lithium ion battery is which is a simplified version of the expression first proposed by Bernardi et al [20].”
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677 · cited 2×
“The conventional approach to temperature estimation is to use numerical electrical–thermal models [3]–[7].”
Lin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
Cited by
Wang, Y., Tian, J., Sun, Z., Wang, L., Xu, R., Li, M., & Chen, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110015 · Cited by 1,377
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
A review on various temperature-indication methods for Li-ion batteries
Raijmakers, L. H. J., Danilov, D. L., Eichel, R.-A., & Notten, P. H. L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.078 · Cited by 424
Gaussian Process Regression for In Situ Capacity Estimation of Lithium-Ion Batteries
Richardson, R. R., Birkl, C. R., Osborne, M. A., & Howey, D. A. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2794997 · Cited by 407
“It is probable that higher prespecified C-rates may result in lower performance—since higher C-rates result in some of the subtler features of the OCV curve being smoothed out by the cell impedance—but it is not clear to what extent this would be the case.”
MethodSelf-citationDai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 405
Metadata
- Authors
- Richardson, R. R., & Howey, D. A.
- Venue
- IEEE Transactions on Sustainable Energy
- Published
- 2015-10
- Volume
- 6
- Issue
- 4
- Pages
- 1190-1199
- ISSN
- 1949-3029 (ISSN-L)
- 1949-3037
- OpenAlex
- W2057307992
- Cited by
- 191
- References
- 3
- FWCI
- 6.49
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.