Analysis and Design of Load-Independent Output Current or Output Voltage of a Three-Coil Wireless Power Transfer System
The DOI matches its Crossref record.
Abstract
The design of operating frequencies and compensation topologies for load-independent output current or output voltage in two-coil wireless power transfer (WPT) system has been widely studied. The three-coil WPT system has been proven to be more efficient and shows a better performance compared to the two-coil WPT system with an increasing transmission distance. However, the research on load-independent output voltage or output current of the three-coil WPT system is still at pilot stage. This paper systematically investigates the load-independent output voltage and output current characteristics of a three-coil WPT system to achieve a constant output voltage (CV) and constant output current (CC) with near zero reactive power, which can simplify the control. The CV and CC characteristics are achieved by well-designed passive parameters of the receiver side compensation. Additionally, a hybrid receiver side compensation with two additional switches for the three-coil WPT system is developed to charge the electric vehicle battery by combining the CC and CV characteristics. Finally, a scaleddown experimental setup with 4-A charging current and 96-V cell voltage is constructed to verify the proposed approach. The experimental results agree well with the theoretical analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
“This topology is popular because of the characteristics like high misalignment tolerance, high efficiency and load independence characteristics [89], [90], [150]–[152].”
BackgroundShevchenko, V., Husev, O., Strzelecki, R., Pakhaliuk, B., Poliakov, N., & Strzelecka, N. (2019) · IEEE Access · doi:10.1109/access.2019.2937891 · Cited by 242
“The double-sided LCC compensation is the most popular as it can reduce the current stress in the inverter, has a high efficiency, high misalignment tolerance and load independence characteristics [11], [101]–[103].”
BackgroundMethod
Metadata
- Authors
- Li, Y., Xu, Q., Lin, T., Hu, J., He, Z., & Mai, R.
- Venue
- IEEE Transactions on Transportation Electrification
- Published
- 2018-06
- Volume
- 4
- Issue
- 2
- Pages
- 364-375
- ISSN
- 2332-7782 (ISSN-L)
- OpenAlex
- W2790205304
- Cited by
- 158
- References
- 0
- FWCI
- 4.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Design of Load-Independent Output Current or Output Voltage of a Three-Coil Wireless Power Transfer System. https://app.cochat.ai/papers/10.1109/tte.2018.2808698
- The paper
- Li, Y., Xu, Q., Lin, T., Hu, J., He, Z., & Mai, R. (2018). Analysis and Design of Load-Independent Output Current or Output Voltage of a Three-Coil Wireless Power Transfer System. IEEE Transactions on Transportation Electrification. https://doi.org/10.1109/tte.2018.2808698
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.