The Electromagnetic Losses Analysis of Inverter-Fed Induction Motor Accounting for Interbar Current and Rotor Slip Frequency
The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
Compared with the fundamental loss, the harmonic losses become very complicated because of the coupling between the power supply harmonics and the motor harmonics. To dispose of this problem, a multislice 2-D finite element model considering the interbar currents and a fast rotor harmonics identification method is employed to identify the harmonics of the rotor current density and flux density of the inverter-fed induction motor (IM). Considering the complex coupling phenomenon of time–space harmonics, a two-term iron model with piecewise-defined variable coefficients (PVCIL model) and a finite element analysis (FEA)-based copper loss method are then used to calculate the iron and copper loss components of the inverter-fed IM. Finally, based on the introduced methods, both the electromagnetic field and different losses terms of the same 5.5-kW inverter-fed IM under different load and supply conditions are calculated and analyzed. The experimental validation of those two losses’ calculation methods is performed on a 5.5-kW IM with different operating conditions. The results obtained in this article can provide the theoretical basis for targeted harmonic elimination and loss reduction in the design phase of the inverter-fed IM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“thus, students are not educated to address and deal with the technical means of IoT applications in the Energy Internet, such as home energy management, smart street light management, and coordination of source networks and loads, which will greatly reduce the efficiency of the Energy Internet [81].”
From Reform of Electrical Engineering Undergraduate Teaching and the Curriculum System in the Context of the Energy Internet (2023) · cites this paper as [81]
Citations
Cites
On the variation with flux and frequency of the core loss coefficients in electrical machines
Ionel, D. M., Popescu, M., Dellinger, S. J., Miller, T. J. E., Heideman, R. J., & McGilp, M. I. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.872941 · Cited by 263 · cited 3×
“2 T or when the frequency is greater than 400 Hz [22], [23].”
BackgroundMethodMechanical Design of Electric Motors
Tong, W. (2014) · CRC Press eBooks · doi:10.1201/b16863 · Cited by 189 · cited 1×
“It is estimated that, by 2030, the annual energy consumption of the electric motor will reach 13360 TWh, and consumers will spend $565 billion a year on electricity bills [4].”
BackgroundPWM Carrier Harmonic Iron Loss Reduction Technique of Permanent-Magnet Motors for Electric Vehicles
Miyama, Y., Hazeyama, M., Hanioka, S., Watanabe, N., Daikoku, A., & Inoue, M. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2533598 · Cited by 109
Vincent, D., Huynh, P. S., Azeez, N. A., Patnaik, L. M., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2923883 · Cited by 104 · cited 1×
“Governments around the globe have carried out action plans for the accelerated adoption of electric motors [5].”
BackgroundEfficiency and Cost Optimized Design of an Induction Motor Using Genetic Algorithm
Mallik, S., Mallik, K., Barman, A., Maiti, D., Biswas, S. K., Deb, N. K., & Basu, S. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2703687 · Cited by 86
Iron-Loss Model With Consideration of Minor Loops Applied to FE-Simulations of Electrical Machines
Steentjes, S., von Pfingsten, G., Hombitzer, M., & Hameyer, K. (2013) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2244072 · Cited by 73 · cited 4×
“However, when the fundamental frequency is dominant among the harmonic components, the Fourier harmonic analysis can be used for machine simulation during steady-state operation [16]–[23].”
BackgroundMethodInfluentialFast Method for the Iron Loss Prediction in Inverter-Fed Induction Motors
Boglietti, A., Cavagnino, A., & Lazzari, M. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2040055 · Cited by 65
Steentjes, S., Hameyer, K., Dolinar, D., & Petrun, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2570200 · Cited by 65 · cited 1×
“[27] use the compensation method to take into account the effects of the harmonics.”
MethodConverter-Fed Induction Motor Efficiency: Practical Applicability of IEC Methods
Kärkkäinen, H., Aarniovuori, L., Niemelä, M., & Pyrhonen, J. J. (2017) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2017.2693421 · Cited by 64
Efficiency Assessment of Induction Motors Operating Under Different Faulty Conditions
Garcia, M., Panagiotou, P. A., Daviu, J. A. A., & Gyftakis, K. N. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2885719 · Cited by 64 · cited 1×
“structure, it is necessary to understand the loss characteristics of the IM inverter [34]–[38].”
BackgroundZhang, D., Liu, T., Zhao, H., & Wu, T. X. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2889631 · Cited by 64 · cited 1×
“This is because, in the case of electric motors, the flux density with a fundamental frequency is always largely dominant, even in the case of a PWM converter-powered motor [32].”
BackgroundSelf-citationRoudsari, H. M., Jalilian, A., & Jamali, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2801779 · Cited by 57 · cited 1×
“3104400 electrification [2], [3], the proportion of electricity in total energy is increasing year on year.”
BackgroundZhang, D., An, R., & Wu, T. X. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0464 · Cited by 54 · cited 2×
“For the calculation of the copper stator loss, we should consider not only the losses caused by strange harmonic currents but also the losses caused by circulating currents in stator windings [19].”
BackgroundMethodSelf-citationIron Loss Model for Electrical Machine Fed by Low Switching Frequency Inverter
Xue, S., Feng, J., Guo, S., Chen, Z., Peng, J., Chu, W. Q., Xu, P. L., & Zhu, Z. Q. (2017) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2017.2696360 · Cited by 51
Zhao, H., Zhang, D., Wang, Y., Zhan, Y., & Xu, G. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2740278 · Cited by 50
Self-citationEffects of Manufacturing Processes on Core Losses of Electrical Machines
Sundaria, R., Lehikoinen, A., Arkkio, A., & Belahcen, A. (2020) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.2999528 · Cited by 40 · cited 1×
“the performance of ferromagnetic materials is more easily affected in the process of motor processing and manufacturing [14].”
BackgroundSegregation of Iron Losses From Rotational Field Measurements and Application to Electrical Machine
Belahcen, A., Rasilo, P., & Arkkio, A. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2284606 · Cited by 36 · cited 1×
“lot of papers on the iron loss caused by the local hysteresis loop and the rotating magnetic field [23]–[28].”
BackgroundSome commentary on the choice of rotor bar material for induction motors
Dymond, J. H., & Findlay, R. D. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.464864 · Cited by 32 · cited 1×
“However, the actual production process often leads to the discontinuity of the oxide layer [41], and the aging of the bar leads to cracks, bulges, fractures, and other problems [42].”
BackgroundYamazaki, K., & Watanabe, Y. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.871423 · Cited by 32 · cited 2×
“In [20], [43]–[49], the method for the identification of copper and iron loss is discussed in detail.”
BackgroundMethodZhang, D., Dai, H. J., Zhao, H., & Wu, T. X. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2779432 · Cited by 32 · cited 1×
“This article uses a polynomial fitting and differential method to obtain the main rotor harmonic components [46].”
MethodSelf-citationCheaytani, J., Bénabou, A., Tounzi, A., & Dessoude, M. (2017) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2017.2661878 · Cited by 31
Koo, M.-M., Choi, J.-Y., Hong, K., & Lee, K. (2015) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2015.2442240 · Cited by 27 · cited 1×
“Motor finite element models can be divided into the 2-D model and the 3-D model [39].”
BackgroundPiecewise variable parameter model for precise analysis of iron losses in induction motors
Zhao, H., Wang, Y., Zhang, D., Zhan, Y., Xu, G., & Yingli, L. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0009 · Cited by 27 · cited 2×
“goes beyond the linear range, and the classical trinomial iron loss model fails [15].”
BackgroundSelf-citationCore Loss Estimation in Electric Machines With Flux-Controlled Core Loss Tester
Tekgün, B., Sozer, Y., Tsukerman, I., Parag, U., & Englebretson, S. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2874352 · Cited by 26
A Simple Torque Estimator for In-Service Efficiency Determination of Inverter-Fed Induction Motors
Stopa, M. M., Resende, M. R., Luiz, A.-S. A., Justino, J. C. G., Rodrigues, G. G., & Filho, B. J. C. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2963832 · Cited by 26
Rotor cage anomalies and unbalanced magnetic pull in single-phase induction motors
Williamson, S., Healey, R. C., Lloyd, J. D., & Tevaarwerk, J. L. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.649968 · Cited by 24
Standard Efficiency Determination of Induction Motors With a PWM Inverter Source
Agamloh, E. B., Cavagnino, A., & Vaschetto, S. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2869118 · Cited by 24 · cited 1×
“structure, it is necessary to understand the loss characteristics of the IM inverter [34]–[38].”
BackgroundBoucher, M. (2019) · IEEE Electrification Magazine · doi:10.1109/mele.2019.2925730 · Cited by 24 · cited 1×
“3104400 electrification [2], [3], the proportion of electricity in total energy is increasing year on year.”
BackgroundKnight, A. M., Salmon, J., & Ewanchuk, J. (2013) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2242055 · Cited by 23 · cited 1×
“Due to the harmonic problem of the PWM inverter, it is extremely difficult to timely analyze the electromagnetic loss of inverter-fed IM, especially when the carrier inverter frequency is relatively large [12].”
BackgroundEmbedded Ring-Type Inductors Modeling With Application to Induction Heating Systems
Carretero, C., Acero, J., Alonso, R., Burdio, J. M., & Monterde, F. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2026169 · Cited by 22 · cited 1×
“6 mm is generally used for stator winding wires now [47], while the skin effect of the conductor is related to the radius and current frequency of conductor [20].”
BackgroundNobile, G., Scelba, G., Cacciato, M., & Scarcella, G. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2875633 · Cited by 21 · cited 1×
“the efficiency of IM can be optimized by improving both the optimal control strategy and the motor structure [31]–[33].”
BackgroundAnalysis of the proximity and skin effects on copper loss in a stator core
Młot, A., Korkosz, M., Grodzki, P., & Łukaniszyn, M. (2014) · Archives of Electrical Engineering · doi:10.2478/aee-2014-0017 · Cited by 20 · cited 4×
“to be at 10 kHz or even higher for the epidermal effect to have a significant impact on the conductor resistance [20].”
BackgroundMethodInfluentialParallel Performance of Multi-Slice Finite-Element Modeling of Skewed Electrical Machines
Keränen, J., Ponomarev, P., Pippuri-Mäkeläinen, J., Råback, P., Lyly, M., & Westerlund, J. (2017) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2017.2653421 · Cited by 20 · cited 1×
“In order to reduce computer resources, a multislice 2-D finite element model, which not only reduces the calculation amount but also increases the calculation accuracy, is used to consider the influence of the interbar current and skin effect in the squirrel cage rotor [40].”
MethodHuchche, V., Patne, N. R., & Junghare, A. S. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2763606 · Cited by 20 · cited 1×
“IM is the most widely used motor in various types of electric motors [6], [7].”
BackgroundPan, J., Yang, Y. B., Li, J., Wang, F., Abdullah, Y. M., & Xu, L. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2990945 · Cited by 19 · cited 1×
“With the electric energy substitution [1] and transportation”
BackgroundChen, H., Nejadi-Koti, H., Demerdash, N. A. O., Rahman, K. M., & Sun, Y. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2995816 · Cited by 16 · cited 1×
“There are many types of numerical methods, among which the finite element method is more in line with the needs of current electromagnetic field analysis engineering and has, therefore, been widely used in such problems [17], [18].”
MethodMadescu, G., Biriescu, M., Tutelea, L. N., Moţ, M., Svoboda, M., & Boldea, I. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2677337 · Cited by 15
Simplified 3-D Modeling for Skewed Rotor Slots With End-Ring of Cage Induction Motors
Yamada, K., Takahashi, Y., & Fujiwara, K. (2015) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2015.2471851 · Cited by 14
High-Frequency Interbar Current Losses in Cage Induction Motors Under No-Load Condition
Nakahara, A., Kikuchi, S., Nishihama, K., Miyoshi, T., & Kaihatsu, K. (2014) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2014.2327115 · Cited by 14
The European Standard EN 50598-2: Efficiency classes of converters and drive systems
Tsoumas, I. P., Tischmacher, H., & Köllensperger, P. A. (2014) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2014.6960292 · Cited by 14 · cited 1×
“According to the Relevant European standards [10], [11], PWM harmonic loss accounts for about 25% of the electromagnetic loss of IE2-Class Motors.”
BackgroundZhang, D., Liu, T., He, C., & Wu, T. X. (2018) · IEEE Access · doi:10.1109/access.2018.2867277 · Cited by 13 · cited 1×
“There are many types of numerical methods, among which the finite element method is more in line with the needs of current electromagnetic field analysis engineering and has, therefore, been widely used in such problems [17], [18].”
MethodSelf-citationThe effect of interbar currents in a permanent split capacitor motor
Williamson, S., & Poh, C. Y. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.870028 · Cited by 9 · cited 1×
“Studies have found that, when the motor is running normally, the harmonic component of the interbar current is more apparent [43], and the harmonic loss caused by the interbar current is closely related to the value of the contact resistance and the degree of the skewed slot [44], [45].”
BackgroundFast Solution of Rotor Losses in Inverter-Fed Cage Induction Motors With Skewed Slots
Zhan, Y., Li, B., Zhao, H., Xu, G., & Zhang, D. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2957970 · Cited by 8
Self-citationMcElveen, R., Melfi, M. J., & McFarland, J. D. (2019) · IEEE Industry Applications Magazine · doi:10.1109/mias.2018.2875208 · Cited by 6 · cited 1×
“According to IEC/TS 60034-2-3, the loss of inverter-fed IM is mainly divided into two parts [8], [9]: the first part is the fundamental loss caused by the fundamental wave, and the second part is the harmonic loss caused by the high harmonic PWM converter.”
Bucci, G., Ciancetta, F., Fiorucci, E., & Ometto, A. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2652078 · Cited by 3
Barth, R., & Chakkalakal, F. (2019) · IEEE Industry Applications Magazine · doi:10.1109/mias.2019.2943651 · Cited by 2 · cited 1×
“The analytical method relies on the personal experience of the engineers, and some local effects, such as the saturation effect of the magnetic circuit and the skin effect of the starting rotor, are difficult to consider accurately [13].”
Method
Research works printed but not linked: 3
- 2013, Rotating Electrical Machines—Part 2-3: Specific Test Methods for Determining Losses and Efficiency of Converter-Fed AC Induction Motors
- 2014, Ecodesign for Power Drive Systems, Motor Starters, Power Electronics and Their Driven Applications–Part 2: Energy Efficiency Indicators for Power Drive Systems and Motor Starters
- Jordan, 1924, Die ferromagnetischen konstanten für schwache wechselfelder, Elektr. Nach. Techn., 1, 8
Cited by
Li, K., Zhang, Y., & He, Q. (2024) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13227-z · Cited by 29
“…of the motorized spindle’s thermal characteristic mechanism are the bearing’s friction mechanism [48, 49], the motor’s electromagnetic loss mechanism [46, 47], the heat conduction between parts and components, and the convective heat transfer between liquid and the motorized spindle structure [50].”
Self-citationPadmanabhan, J. B., & Anbazhagan, G. (2024) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2024.2319347 · Cited by 23
“PMSM motors generate a lot of torque for their size and weight (D. Zhang et al. 2022).”
The Influence of Loss Distribution on the Temperature Field of High-Speed Induction Motor
Yu, X., Chen, D., Wu, X., & Ai, M. (2024) · IEEE Access · doi:10.1109/access.2024.3373544 · Cited by 12
“This phenomenon is generally suppressed by using a smaller conductor diameter in high-speed motors, which can effectively reduce the loss of the stator winding [20], [21].”
BackgroundEbrahim, O. S., Badr, M. A. L., Elgendy, A. S., Jain, P. K., & Shawky, K. O. (2023) · IET Electric Power Applications · doi:10.1049/elp2.12345 · Cited by 11
Li, Y., Zhang, C., & Xu, X. (2022) · Transactions of the Canadian Society for Mechanical Engineering · doi:10.1139/tcsme-2022-0010 · Cited by 10
Metadata
- Authors
- Zhang, D., Yi, J., Zhu, H., Ahmad, T., Zhao, H., Goh, H. H., Zhang, Y., & Wu, T.
- Affiliations
- Guangxi University (CN)
- Jinan University (CN)
- North China Electric Power University (CN)
- Shenyang University of Technology (CN)
- ORCID
- Venue
- IEEE Transactions on Transportation Electrification
- Published
- 2022-03
- Volume
- 8
- Issue
- 1
- Pages
- 1155-1167
- ISSN
- 2332-7782 (ISSN-L)
- 2372-2088
- OpenAlex
- W3193774523
- Cited by
- 16
- References
- 46
- Citations by year
- 2026: 2 · 2025: 3 · 2024: 4 · 2023: 2 · 2022: 5
- FWCI
- 0.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Transportation Electrification (publishedVersion)
- Funders
- National Natural Science Foundation of China (51977077)
- Key Laboratory of Special Machine and High Voltage Apparatus Shenyang University of Technology, Ministry of Education, China (KFKT202006)
- Guangxi Young and Middle-Aged Scientific Research Basic Ability Promotion Project, China (2020KY01009)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Keywords
- inverter-fed induction motor, electromagnetic losses, harmonic losses, flux density harmonics, iron loss, copper loss, loss reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.