CoChat

Review on Time Delay Estimate Subsample Interpolation in Frequency Domain

Svilainis, Linas · 2019 · IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

The DOI matches its Crossref record; 35 of the 40 references it cites were found in a registry or an index.

Abstract

Time delay or the time-of-flight is a most frequently used parameter in many ultrasonic applications. Delay estimation is based on the sampled signal, so the resolution is limited by the sampling grid. Higher accuracy is available if the signal-to-noise ratio is high, then the subsample estimate is desired. Techniques used for subsample interpolation suffer from bias error. Time-of-flight estimation that is free from bias errors is required. The proposed subsample estimation works in the frequency domain; it is based on the cross-correlation peak temporal position. The phase of the cross-correlation frequency response becomes linear thanks to multiplication by the complex conjugate, and its inclination angle is proportional to the delay. Then, subsample interpolation becomes free from the bias error. Twelve algorithmic implementations of this technique have been proposed in this paper. All algorithmic implementations have been analyzed for bias and random errors using simulation and MATLAB codes are given as supplementary material. Comparison with best-performing interpolation techniques (spline approximation, cosine interpolation, carrier phase) is given for both bias and random errors. It was demonstrated that frequency domain interpolation has no bias errors, and noise performance is better or comparable to other subsample estimation techniques. Weighted regression using L2 norm minimization has the best performance: total errors (bias and random) are within 3% of theoretical lower bound.

Overview

Integrity signals

Registry

Crossref · 10.1109/tuffc.2019.2930661

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Research works printed but not linked: 2

  1. 2018, Floating-Point Numbers
  2. 2018, Function GetToFcos

Cited by

See all 40

Metadata

Authors
Svilainis, L.
Affiliations
Kaunas University of Technology (LT)
Corresponding author
Svilainis, Linas
Venue
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Published
2019-11
Volume
66
Issue
11
Pages
1691-1698
ISSN
  • 0885-3010 (ISSN-L)
  • 1525-8955
OpenAlex
W2963679181
Cited by
40
References
40
Citations by year
2026: 2 · 2025: 8 · 2024: 8 · 2023: 5 · 2022: 8 · 2021: 7 · 2020: 2
FWCI
2.50
Type
journal article
Language
en
Open access
closed
Locations
  • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Research, Development and Innovation Fund of Kaunas University of Technology (PP-91F/19)
  • ECERES (DPI2016-78876-R-AEI/FEDER)
  • UE from the Spanish State Research Agency
  • European Regional Development Fund
Topics
  • Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
  • Physical Sciences › Physics and Astronomy › Instrumentation › Flow Measurement and Analysis
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Electrical Measurement Techniques
Keywords
time delay estimation, time-of-flight, frequency-domain interpolation, cross correlation function, bias error, ultrasonic signal processing, weighted regression, L2 norm minimization, noise performance, spline approximation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.