The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Electronic Stability Control Based on Motor Driving and Braking Torque Distribution for a Four In-Wheel Motor Drive Electric Vehicle
Abstract
An electronic stability control (ESC) algorithm is proposed for a four in-wheel motor independent-drive electric vehicle (4MIDEV) utilizing motor driving and regenerative braking torque distribution control to improve vehicle stability. A stability judgment controller, an upper level controller, and a torque distribution algorithm are designed for the ESC system. The stability judgment controller is designed to generate the desired yaw rate and sideslip angle for vehicle stability, and the control mode, which is normal driving mode or ESC mode, is set according to the driver inputs and measurement signal inputs. The upper level controller consists of a speed tracking controller, a yaw moment controller, and four wheel-slip controllers to calculate the desired value of traction force, the desired value of yaw moment, and the four respective net torque inputs of the four in-wheel motors. The torque distribution algorithm is designed to generate each motor driving torque or regenerative braking torque input for each wheel. An average torque distribution strategy, a tire-dynamic-load-based torque distribution strategy, and a minimum-objective-function-based optimal torque distribution strategy are used separately in the torque distribution algorithm to control the motor driving torque or regenerative braking torque for vehicle stability enhancement. The proposed ESC algorithm was implemented and evaluated in a CarSim vehicle model and a MATLAB/Simulink control model. The three proposed torque distribution strategies can be used to regulate the vehicle to perform the following tasks: “single lane change,” “double lane change,” and “snake lane change.” The simulation studies show that the yaw rate error root mean square [RMS$(\gamma-\gamma_\mathrm{-des})$] decreased, on average, by 75 percent using the proposed optimal torque distribution algorithm compared with that without using stability control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shuai, Z., Zhang, H., Wang, J., Li, J., & Ouyang, M. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2279843 · Cited by 340
Self-citationInnovation by in-wheel-motor drive unit
Murata, S. (2012) · Vehicle System Dynamics · doi:10.1080/00423114.2012.666354 · Cited by 241
Wang, R., & Wang, J. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2172822 · Cited by 232
Self-citation(2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2278237 · Cited by 227
Kang, J., Yoo, J., & Yi, K. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2155105 · Cited by 175
Novellis, L. D., Sorniotti, A., Gruber, P., et al. (2015) · Mechatronics · doi:10.1016/j.mechatronics.2014.12.003 · Cited by 145
Chen, Y., & Wang, J. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2187940 · Cited by 133
Self-citationVehicle Optimal Torque Vectoring Using State-Derivative Feedback and Linear Matrix Inequality
Fallah, S., Khajepour, A., Fidan, B., Chen, S.-K., & Litkouhi, B. B. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2232947 · Cited by 77
Alipour, H., Sharifian, M. B. B., & Sabahi, M. (2014) · Vehicle System Dynamics · doi:10.1080/00423114.2014.951661 · Cited by 53
Cited by
Subroto, R. K., Wang, C. Z., & Lian, K. L. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2977598 · Cited by 70
Metadata
- Authors
- Zhai, L., Sun, T., & Wang, J.
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2016-06
- Volume
- 65
- Issue
- 6
- Pages
- 4726-4739
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2345026604
- Cited by
- 368
- References
- 9
- FWCI
- 26.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electronic Stability Control Based on Motor Driving and Braking Torque Distribution for a Four In-Wheel Motor Drive Electric Vehicle. https://app.cochat.ai/papers/10.1109/tvt.2016.2526663
- The paper
- Zhai, L., Sun, T., & Wang, J. (2016). Electronic Stability Control Based on Motor Driving and Braking Torque Distribution for a Four In-Wheel Motor Drive Electric Vehicle. IEEE Transactions on Vehicular Technology. https://doi.org/10.1109/tvt.2016.2526663
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.