Wirelessly Powered Data Aggregation for IoT via Over-the-Air Function Computation: Beamforming and Power Control
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
As a revolution in networking, the Internet of Things (IoT) aims at automating the operations of our societies by connecting and leveraging an enormous number of distributed devices (e.g., sensors and actuators). One design challenge is efficient wireless data aggregation (WDA) over the dense IoT devices. This can enable a series of the IoT applications ranging from latency-sensitive high-mobility sensing to data-intensive distributed machine learning. Over-the-air (function) computation (AirComp) has emerged to be a promising solution that merges computing and communication by exploiting analog-wave addition in the air. Another IoT design challenge is battery recharging for dense sensors which can be tackled by wireless power transfer (WPT). The coexisting of AirComp and WPT in the IoT system calls for their integration to enhance the performance and efficiency of WDA. This motivates the current work on developing the wirelessly powered AirComp (WP-AirComp) framework by jointly optimizing wireless power control, energy and (data) aggregation beamforming to minimize the AirComp error. To derive a practical solution, we recast the non-convex joint optimization problem into the equivalent outer and inner sub-problems for (inner) wireless power control and energy beamforming, and (outer) the efficient aggregation beamforming, respectively. The former is solved in closed form while the latter is efficiently solved using the semidefinite relaxation technique. The results reveal that the optimal energy beams point to the dominant Eigen-directions of the WPT channels, and the optimal power allocation tends to equalize the close-loop (down-link WPT and up-link AirComp) effective channels of different sensors. The simulation demonstrates that the controlling WPT provides additional design dimensions for substantially reducing the AirComp error.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internet of Things (IoT): A vision, architectural elements, and future directions
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013) · Future Generation Computer Systems · doi:10.1016/j.future.2013.01.010 · Cited by 12,293
Computation Over Multiple-Access Channels
Nazer, B., & Gastpar, M. (2007) · IEEE Transactions on Information Theory · doi:10.1109/tit.2007.904785 · Cited by 753
MIMO Over-the-Air Computation for High-Mobility Multimodal Sensing
Zhu, G., & Huang, K. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2871070 · Cited by 273
Self-citationOver-the-air Function Computation in Sensor Networks
Abari, O., Rahul, H., & Katabi, D. (2016) · arXiv · doi:10.48550/arxiv.1612.02307 · Cited by 114
Cited by
Broadband Analog Aggregation for Low-Latency Federated Edge Learning
Zhu, G., Wang, Y., & Huang, K. (2020) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2019.2946245 · Cited by 761
Self-citationXu, W., Yang, Z., Ng, D. W. K., Levorato, M., Eldar, Y. C., & Debbah, M. (2023) · IEEE Journal of Selected Topics in Signal Processing · doi:10.1109/jstsp.2023.3239189 · Cited by 660
Zhu, G., Du, Y., Gunduz, D., & Huang, K. (2021) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2020.3039309 · Cited by 376
“This novel design will allow implementing AirComp across devices that are endowed with digital modulation chips, without requiring significant changes in the hardware or the communication architecture.”
MethodInfluentialSelf-citationWireless-Powered Over-the-Air Computation in Intelligent Reflecting Surface-Aided IoT Networks
Wang, Z., Shi, Y., Zhou, Y., Zhou, H., & Zhang, N. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3015489 · Cited by 131
“The integration of AirComp and energy beamforming (EB) in IoT networks was recently studied in [21], where the IoT devices utilized the harvested energy to support AirComp.”
BackgroundMethodOver-the-Air Computation via Reconfigurable Intelligent Surface
Fang, W., Jiang, Y., Shi, Y., Zhou, Y., Chen, W., & Letaief, K. B. (2021) · IEEE Transactions on Communications · doi:10.1109/tcomm.2021.3114791 · Cited by 93
Metadata
- Authors
- Li, X., Zhu, G., Gong, Y., & Huang, K.
- Venue
- IEEE Transactions on Wireless Communications
- Published
- 2019-07
- Volume
- 18
- Issue
- 7
- Pages
- 3437-3452
- ISSN
- 1536-1276 (ISSN-L)
- 1558-2248
- OpenAlex
- W2887810578
- Cited by
- 139
- References
- 4
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Wirelessly Powered Data Aggregation for IoT via Over-the-Air Function Computation: Beamforming and Power Control. https://app.cochat.ai/papers/10.1109/twc.2019.2914046
- The paper
- Li, X., Zhu, G., Gong, Y., & Huang, K. (2019). Wirelessly Powered Data Aggregation for IoT via Over-the-Air Function Computation: Beamforming and Power Control. IEEE Transactions on Wireless Communications. https://doi.org/10.1109/twc.2019.2914046
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.