UAV Relay-Assisted Emergency Communications in IoT Networks: Resource Allocation and Trajectory Optimization
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Unmanned aerial vehicle (UAV) communication has emerged as a prominent technology for emergency communications (e.g., natural disaster) in the Internet of Things (IoT) networks to enhance the ability of disaster prediction, damage assessment, and rescue operations promptly. A UAV can be deployed as a flying base station (BS) to collect data from time-constrained IoT devices and then transfer it to a ground gateway (GW). In general, the latency constraint at IoT devices and UAV’s limited storage capacity highly hinder practical applications of UAV-assisted IoT networks. In this paper, full-duplex (FD) radio is adopted at the UAV to overcome these challenges. In addition, half-duplex (HD) scheme for UAV-based relaying is also considered to provide a comparative study between two modes (viz., FD and HD). Herein, a device is considered to be successfully served if its data is collected by the UAV and conveyed to GW timely during flight time. In this context, we aim to maximize the number of served IoT devices by jointly optimizing bandwidth, power allocation, and the UAV trajectory while satisfying each device’s requirement and the UAV’s limited storage capacity. The formulated optimization problem is troublesome to solve due to its non-convexity and combinatorial nature. Towards appealing applications, we first relax binary variables into continuous ones and transform the original problem into a more computationally tractable form. By leveraging inner approximation framework, we derive newly approximated functions for non-convex parts and then develop a simple yet efficient iterative algorithm for its solutions. Next, we attempt to maximize the total throughput subject to the number of served IoT devices. Finally, numerical results show that the proposed algorithms significantly outperform benchmark approaches in terms of the number of served IoT devices and system throughput.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless communications with unmanned aerial vehicles: opportunities and challenges
Zeng, Y., Zhang, R., & Lim, T. J. (2016) · IEEE Communications Magazine · doi:10.1109/mcom.2016.7470933 · Cited by 4,048
Technical Note—A General Inner Approximation Algorithm for Nonconvex Mathematical Programs
Marks, B. R., & Wright, G. P. (1978) · Operations Research · doi:10.1287/opre.26.4.681 · Cited by 985
Cited by
Energy Efficient Computation Offloading in Aerial Edge Networks With Multi-Agent Cooperation
Liu, W., Li, B., Xie, W., Dai, Y., & Fei, Z. (2023) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2023.3235997 · Cited by 180
“To exploit the performance of UAV in special situations, Do-Duy et al. [14] and Tran et al. [15] studied the joint deployment and resource configuration in UAV-aided disaster emergency communications by using iterative methods.”
Metadata
- Authors
- Tran, D.-H., Nguyen, V.-D., Chatzinotas, S., Vu, T. X., & Ottersten, B.
- Venue
- IEEE Transactions on Wireless Communications
- Published
- 2022-03
- Volume
- 21
- Issue
- 3
- Pages
- 1621-1637
- ISSN
- 1536-1276
- 1558-2248
- OpenAlex
- W3198103443
- Cited by
- 198
- References
- 2
- FWCI
- 9.61
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.