Plastic waste management, a matter for the ‘community’
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Worldwide plastic production has surged over the past 50 years. In 2016, it reached 335 million tonnes per annum, with Europe alone producing 60 million tonnes. Over the next 20 years, it is expected to double. Plastic packaging is the most important product (26% of the total volume of all plastics used), although it has a short life compared to plastics used in, for example, the construction and car industries. Plastic producers and transformers are keen to highlight the benefits derived from plastic packaging; not only does it deliver direct economic profits, but it also helps prevent food waste and contamination. Further, by lessening the weight of packaging, it can reduce the fuel used in the transport of goods. This is certainly important, but even if these plastics are re-used, they inevitably become waste at some point. If we are to close the loop of the circular economy, this waste needs to be seen as a resource to be plugged back into the life cycle of plastics (PlasticsEurope, 2018). Unfortunately, a very large quantity of plastic waste leaks into the environment causing significant economic and ecological damage. For example, some 5–13 million tonnes of plastic (1.5–4% of global plastic production) end up in the ocean every year (Geyer et al., 2017). Educational campaigns are now focusing on the idea of citizens understanding themselves as members of a global community that can reduce the demand for plastic. However, according to all current expert reports, if the advantages of plastics are to be enjoyed in full, we also need to promote the most sustainable waste management alternatives, encourage recycling, use energy recovery as a complementary option and restrict the dumping in landfills of all recoverable plastic waste. Of the 25.8 million tonnes of plastic waste generated in Europe every year, under 30% is collected for recycling; 31% ends up in landfills and 39% is incinerated. Within this context, the European Strategy for Plastics in a Circular Economy, adopted on 16 January 2018, aims to transform the way plastic products are designed, produced, used and recycled in the EU. The most challenging goals laid out include those of ensuring that, by 2030, all plastic packaging in the EU should be reusable or recyclable in a cost-effective manner, and that more than half of all plastic waste generated in Europe be recycled (European Commission, 2018). Mechanical recycling is currently the most common method used to recycle plastic waste (Ragaert et al., 2017); the term covers its collection, sorting, washing and grinding. The actual procedures followed depend on the origin and composition of the waste. For example, postindustrial (PI) wastes are usually clean, have no organic residues and are of known composition. In contrast, postconsumer wastes (PC) are often mixed polymer wastes with many organic and inorganic impurities – a huge challenge for recycling. Four polymers – high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET) – dominate the plastic waste derived from PC packaging. PC is by far the biggest fraction of plastic packaging waste and the most difficult to deal with. However, some common challenges arise when mechanically recycling both PI and PC. The main issue is the fact that, under certain heat, oxidation, radiation, hydrolysis and mechanical shear conditions, polymers of both types degrade in an uncontrolled manner. Indeed, the degradation that occurs during a PC's long-term exposure to such factors can be very significant. An additional challenge for the recycling of mixed plastic waste is the differences in the melting points and processing temperatures of the different polymers involved. Drawbacks like these have led to a growing interest in chemical and biotechnological recycling technologies. Chemical recycling involves transforming a plastic's polymers into its smaller oligomers or monomers, which can then be converted into chemicals, fuels or virgin plastics. Chemical recycling routes are generally divided into thermochemical or catalytic conversion processes, but can involve their combination. Well-known processes include gasification, pyrolysis and catalysed cracking (Ragaert et al., 2017). Pyrolysis is an attractive technology for plastics that are currently incinerated or dumped in landfills due to intrinsic difficulties in mechanical or chemical recycling. Such is the case, for example, of mixed multilayer films, which are harder to recycle than the metal, paper and glass containers they have replaced. Against this background, some sustainable initiatives have been started. For instance, hybrid bio-based high oxygen/water barriers and active coatings are being developed for use in monolayer bio-based food packaging (films and trays) in a joint industrial and academic initiative. This could provide an alternative to current metalized packaging. It aims to avoid the use of non-renewable materials in mu
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384 · cited 1×
“Amongst the biotic factors, and in addition to the abovementioned enzymes, several oxidoreductases have been shown to degrade PE (Lucas et al., 2008).”
BackgroundBiodegradation of polyethylene microplastics by the marine fungus Zalerion maritimum
Paço, A., Duarte, K., da Costa, J. P., Santos, P. S. M., Pereira, R., Pereira, M. E., Freitas, A. C., Duarte, A. C., & Rocha-Santos, T. A. P. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.02.017 · Cited by 724
Munir, E., Harefa, R. S. M., Priyani, N., & Suryanto, D. (2018) · IOP Conference Series: Earth and Environmental Science · doi:10.1088/1755-1315/126/1/012145 · Cited by 126
Cited by
An Overview of Plastic Waste Generation and Management in Food Packaging Industries
Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N. (2021) · Recycling · doi:10.3390/recycling6010012 · Cited by 647
Chen, H. L., Nath, T. K., Chong, S., Foo, V., Gibbins, C., & Lechner, A. M. (2021) · SN Applied Sciences · doi:10.1007/s42452-021-04234-y · Cited by 381
Cui, H., Surendhiran, D., Li, C., & Lin, L. (2020) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2020.100511 · Cited by 279
Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste
Jung, H., Shin, G., Kwak, H., Hao, L. T., Jegal, J., Kim, H. J., Jeon, H., Park, J., & Oh, D. X. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138089 · Cited by 271
Construction and built environment in circular economy: A comprehensive literature review
Çimen, Ö. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127180 · Cited by 269
Metadata
- Authors
- Drzyzga, O., & Prieto, A.
- Venue
- Microbial Biotechnology
- Publisher
- Wiley
- Published
- 2018-11-08
- Volume
- 12
- Issue
- 1
- Pages
- 66-68
- ISSN
- 1751-7915 (ISSN-L)
- OpenAlex
- W2899877777
- Cited by
- 144
- References
- 5
- FWCI
- 9.64
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Plastic waste management, a matter for the ‘community’. https://app.cochat.ai/papers/10.1111/1751-7915.13328
- The paper
- Drzyzga, O., & Prieto, A. (2019). Plastic waste management, a matter for the ‘community’. Microbial Biotechnology. https://doi.org/10.1111/1751-7915.13328
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.