The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Relation Between Strength, Fracture Energy, and Microstructure of Hot‐Pressed Si 3 N 4
Abstract
A fracture mechanics approach was used to investigate the high strength of hot‐pressed Si 3 N 4 . Room‐temperature flexural strengths, fracture energies, and elastic moduli were determined for material fabricated from α‐ and β‐phase Si 3 N 4 powders. When the proper powder preparation technique was used, α‐phase powder resulted in a high fracture energy (69,000 ergs/cm 2 ), a high flexural strength (95,000 psi), and an elongated (fiberlike) grain morphology, whereas β‐phase powder produced a low fracture energy (16,000 ergs/cm 2 ), a relatively low strength (55,000 psi), and an equiaxed grain morphology. It was hypothesized that the high strength of Si 3 N 4 hot‐pressed from α‐phase powder results from its high fracture energy, which is attributed to the elongated grains. High‐strength Si 3 N 4 has directional properties caused, in part, by the elongated grain structure, which is oriented preferentially with respect to the hot‐pressing direction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plane Strain Crack Toughness Testing of High Strength Metallic Materials
Brown, W. F., & Srawley, J. E. (1966) · doi:10.1520/stp44663s · Cited by 1,473
The work of fracture and its measurement in metals, ceramics and other materials
Tattersall, H. G., & Tappin, G. (1966) · Journal of Materials Science · doi:10.1007/bf00550177 · Cited by 450
Cited by
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
Metadata
- Authors
- LANGE, F. F.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1973-10
- Volume
- 56
- Issue
- 10
- Pages
- 518-522
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2062598582
- Cited by
- 280
- References
- 2
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Relation Between Strength, Fracture Energy, and Microstructure of Hot‐Pressed Si 3 N 4. https://app.cochat.ai/papers/10.1111/j.1151-2916.1973.tb12401.x
- The paper
- LANGE, F. F. (1973). Relation Between Strength, Fracture Energy, and Microstructure of Hot‐Pressed Si 3 N 4. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1973.tb12401.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.