The DOI matches its Crossref record.
Fracture Toughness Determination of A1 2 O 3 Using Four‐Point‐Bend Specimens with Straight‐Through and Chevron Notches
Abstract
Fracture toughness of a sintered A1 2 O 3 was determined with four‐point‐bend specimens having either straight‐through or chevron notches. For the straight‐through notched specimens, measured K Ic decreased with decreasing notch width. For the smallest notch width (66 μm) K Ic = 3.42±0.13 MN m −¾ . For specimens with chevron notches, a crack initiates and extends from the tip of the notch under increasing load. K Ic is calculated from the maximum load without measuring crack length, under the assumption that the derivative of the compliance is the same as that for a specimen with a straight‐through crack. A refined calculation accounts for the truncated chevron crack shape at maximum load using Bluhm's slice model. For the chevronnotch configuration, a value of K Ic = 3.49±0.11 MN m −¾ was measured, which appears to be independent of the initial notch length a 0 (distance from the crack mouth to the tip of the triangular notch). An effect of a 1 (length of the chevron notch at the surface) on K Ic was observed, independent of whether the calculation of K Ic was based on the straight‐through crack assumption or on the slice model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Berto, F., & Lazzarin, P. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.11.001 · Cited by 550
MECHANICAL PERFORMANCE OF QUARTZ‐TEMPERED CERAMICS: PART I, STRENGTH AND TOUGHNESS*
KILIKOGLOU, V., VEKINIS, G., MANIATIS, Y., & DAY, P. M. (1998) · Archaeometry · doi:10.1111/j.1475-4754.1998.tb00837.x · Cited by 155
Metadata
- Authors
- MUNZ, D., BUBSEY, R. T., & SHANNON, J. L.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1980-05
- Volume
- 63
- Issue
- 5-6
- Pages
- 300-305
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2166702251
- Cited by
- 227
- References
- 0
- FWCI
- 7.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fracture Toughness Determination of A1 2 O 3 Using Four‐Point‐Bend Specimens with Straight‐Through and Chevron Notches. https://app.cochat.ai/papers/10.1111/j.1151-2916.1980.tb10725.x
- The paper
- MUNZ, D., BUBSEY, R. T., & SHANNON, J. L. (1980). Fracture Toughness Determination of A1 2 O 3 Using Four‐Point‐Bend Specimens with Straight‐Through and Chevron Notches. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1980.tb10725.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.