The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Theory of Mechanical Properties of Ceramic‐Matrix Composites
Open accessAbstract
A theory is presented to predict the pullout work and ultimate tensile strength of ceramic‐matrix composite (CMC) materials tested under uniaxial tension as functions of the underlying material properties. By assuming that the fibers fracture independently and that global load redistribution occurs upon fiber fracture, the successive fragmentation of each fiber in the multifiber composite becomes identical to that of a single fiber embedded in a homogeneous large‐failure‐strain matrix, which has recently been solved exactly by the present author. From single‐fiber fragmentation, the multifiber composite distribution of pullout lengths, work of pullout, and ultimate tensile strength are easily obtained. The trends in these composite properties as a function of the statistical fiber strength, the fiber radius and fill fraction, and the sliding resistance τ between the fibers and the matrix easily emerge from this approach. All these properties are proportional to a characteristic gauge length δ c and/or the associated characteristic stress σ, with proportionality constants depending only very weakly on the fiber Weibull modulus: the pullout lengths scale with δ c , the work of pullout scales with σ c δ c , and the ultimate strength scales with σ c . The key length δ c is the generalization of the “critical length,” defined by Kelly for single‐strength fibers, to fibers with a statistical distribution of strengths. The theory also provides an interpretation of fracture‐mirror measurements of pulled‐out fiber strengths so that the in situ key strength σ c and Weibull modulus of the fibers can be determined directly. Comparisons of the theoretical predictions of the ultimate tensile strength to literature data on Nicalon/lithium aluminum silicate (LAS) composites generally show good agreement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The mechanics of matrix cracking in brittle-matrix fiber composites
Marshall, D. B., Cox, B. N., & Evans, A. G. (1985) · Acta Metallurgica · doi:10.1016/0001-6160(85)90124-5 · Cited by 1,056
TREATISE ON MATERIALS SCIENCE AND TECHNOLOGY
(1973) · Treatise on Materials Science & Technology · doi:10.1016/c2013-0-07362-8 · Cited by 311
Cited by
The physics and mechanics of fibre-reinforced brittle matrix composites
Evans, A. G., & Zok, F. W. (1994) · Journal of Materials Science · doi:10.1007/bf00355946 · Cited by 646
Statistical models of fracture
Alava, M. J., Nukala, P. K. V. V., & Zapperi, S. (2006) · Advances in Physics · doi:10.1080/00018730300741518 · Cited by 588
Mortensen, A., & Llorca, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104511 · Cited by 477
Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites
Xia, Z., Riester, L., Curtin, W. A., Li, H., Sheldon, B. W., Liang, J., Chang, B., & Xu, J. M. (2004) · Acta Materialia · doi:10.1016/j.actamat.2003.10.050 · Cited by 472
Self-citationStatistical physics approach to understanding the multiscale dynamics of earthquake fault systems
Rundle, J. B., Turcotte, D. L., Shcherbakov, R., Klein, W., & Sammis, C. (2003) · Reviews of Geophysics · doi:10.1029/2003rg000135 · Cited by 430
Metadata
- Authors
- Curtin, W. A.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1991-11
- Volume
- 74
- Issue
- 11
- Pages
- 2837-2845
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1980568191
- Cited by
- 941
- References
- 2
- FWCI
- 45.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Theory of Mechanical Properties of Ceramic‐Matrix Composites. https://app.cochat.ai/papers/10.1111/j.1151-2916.1991.tb06852.x
- The paper
- Curtin, W. A. (1991). Theory of Mechanical Properties of Ceramic‐Matrix Composites. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1991.tb06852.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.