The DOI matches its Crossref record.
In Situ Toughened Silicon Carbide with Al‐B‐C Additions
Abstract
“ In situ toughened” silicon carbides, containing Al, B, and C additives, were prepared by hot pressing. Densification, phase transformations, and microstructural development were described. The microstructures, secondary phases, and grain boundaries were characterized using a range of analytical techniques including TEM, SEM, AES, and XRD. The modulus of rupture was determined from fourpoint bend tests, while the fracture toughness was derived either from bend tests of beam‐shaped samples with a controlled surface flaw, or from standard disk‐shaped compact‐tension specimens precracked in cyclic fatigue. The R ‐curve behavior of an in situ toughened SiC was also examined. A steady‐state toughness over 9 MPa·m 1/2 was recorded for the silicon carbide prepared with minimal additives under optimum processing conditions. This increase in fracture toughness, more than a factor of three compared to that of a commercial SiC, was achieved while maintaining a bend strength of 650 MPa. The mechanical properties were found to be related to a microstructure in which platelike grain development had been promoted and where crack bridging by intact grains was a principal source of toughening.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Self-citationOn the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationCantwell, P. R., Tang, M., Dillon, S. J., Luo, J., Rohrer, G. S., & Harmer, M. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.07.037 · Cited by 916
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
Self-citationOrigins and Applications of London Dispersion Forces and Hamaker Constants in Ceramics
French, R. H. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01527.x · Cited by 282
Metadata
- Authors
- Cao, J. J., MoberlyChan, W. J., De Jonghe, L. C., Gilbert, C. J., & Ritchie, R. O.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1996-02
- Volume
- 79
- Issue
- 2
- Pages
- 461-469
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1981477534
- Cited by
- 213
- References
- 0
- FWCI
- 14.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In Situ Toughened Silicon Carbide with Al‐B‐C Additions. https://app.cochat.ai/papers/10.1111/j.1151-2916.1996.tb08145.x
- The paper
- Cao, J. J., MoberlyChan, W. J., De Jonghe, L. C., Gilbert, C. J., & Ritchie, R. O. (1996). In Situ Toughened Silicon Carbide with Al‐B‐C Additions. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1996.tb08145.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.