The DOI matches its Crossref record.
The effect of pH on surface hardness and microstructure of mineral trioxide aggregate
Abstract
Aim To evaluate the surface microhardness of mineral trioxide aggregate (MTA) specimens following exposure of their surface to a range of acidic environments during hydration. In addition, the morphological microstructure features of samples were studied by scanning electron microscopy (SEM). Methodology White ProRoot MTA (Dentsply Tulsa Dental, Johnson City, TN, USA) was mixed and packed into cylindrical polycarbonate tubes. Four groups, each of 10 specimens, were formed using a pressure of 3.22 MPa and exposed to pH 4.4, 5.4, 6.4 and 7.4, respectively, for 4 days. Vickers microhardness of the surface of each specimen was measured after exposure. Four groups of two specimens were prepared and treated in the same way prior to qualitative examination by SEM. Data were subjected to one‐way anova and post hoc Tukey’s test. Result The greatest mean surface hardness values (53.19 ± 4.124) were observed following exposure to pH 7.4 with the values decreasing to 14.34 ± 6.477 following exposure to pH 4.4. The difference between these values at the 95% CI (33.39–44.30) was statistically significant (P < 0.0001). There were no distinct morphological differences between groups in terms of the internal microstructure. However, a trend was observed that the more acidic the solution, the more extensive the porosity of the specimens. Conclusion Under the conditions of this study, surface hardness of MTA was impaired in an acidic environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tooth discoloration induced by endodontic materials: a laboratory study
Lenherr, P., Allgayer, N., Weiger, R., Filippi, A., Attin, T., & Krastl, G. (2012) · International Endodontic Journal · doi:10.1111/j.1365-2591.2012.02053.x · Cited by 327
Calcium silicate-based cements and functional impacts of various constituents
SAGHIRI, M. A., ORANGI, J., ASATOURIAN, A., GUTMANN, J. L., GARCIA-GODOY, F., LOTFI, M., & SHEIBANI, N. (2017) · Dental Materials Journal · doi:10.4012/dmj.2015-425 · Cited by 103
Metadata
- Authors
- Namazikhah, M. S., Nekoofar, M. H., Sheykhrezae, M. S., Salariyeh, S., Hayes, S. J., Bryant, S. T., Mohammadi, M. M., & Dummer, P. M. H.
- Venue
- International Endodontic Journal
- Publisher
- Wiley
- Published
- 2007-11-27
- Volume
- 41
- Issue
- 2
- Pages
- 108-116
- ISSN
- 0143-2885 (ISSN-L)
- 1365-2591
- OpenAlex
- W2109573577
- Cited by
- 210
- References
- 0
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of pH on surface hardness and microstructure of mineral trioxide aggregate. https://app.cochat.ai/papers/10.1111/j.1365-2591.2007.01325.x
- The paper
- Namazikhah, M. S., Nekoofar, M. H., Sheykhrezae, M. S., Salariyeh, S., Hayes, S. J., Bryant, S. T., Mohammadi, M. M., & Dummer, P. M. H. (2008). The effect of pH on surface hardness and microstructure of mineral trioxide aggregate. International Endodontic Journal. https://doi.org/10.1111/j.1365-2591.2007.01325.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.