Performance of Vibration‐Based Damage Detection Methods in Bridges
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The important advances achieved in the modal identification, sensors, and structural monitoring of bridges have motivated the bridge engineering community to develop damage detection methods based on vibration monitoring. Some of these methods have already been demonstrated under certain conditions in bridges with deliberate damage. However, the performance of these methods for damage detection in bridges has not been fully proven so far and more research needs to be done in this direction. In this article, six damage detection methods based on vibration monitoring are evaluated with two case studies. First, the dynamic simulation and modal parameters of a cracked composite bridge are obtained. Here, the damage detection methods are evaluated under different crack depth, extension of the damage, and noise level. Second, damage is identified in a reinforced concrete bridge. This bridge was deliberately damaged in two phases. In this example, damage detection methods, which do not require comparison between different structural conditions, were applied. In the first case study, evaluated damage detection methods could detect damage for all the damage scenarios; however, their performance was notably affected when noise was introduced to the vibration parameters. In the second case study, the evaluated methods could successfully localize the damage induced to the bridge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 1×
“According to Doebling et al. (1996), these evaluated damages detection methods are classified in level 2, that is, they can identify and localize the damage.”
Background
Cited by
Train–track–bridge dynamic interaction: a state-of-the-art review
Zhai, W., Han, Z., Chen, Z., Ling, L., & Zhu, S. (2019) · Vehicle System Dynamics · doi:10.1080/00423114.2019.1605085 · Cited by 485
Vibration‐based structural state identification by a 1‐dimensional convolutional neural network
Zhang, Y., Miyamori, Y., Mikami, S., & Saito, T. (2019) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12447 · Cited by 303
Smart structures: Part I—Active and semi-active control
Fisco, N. R., & Adeli, H. (2011) · Scientia Iranica · doi:10.1016/j.scient.2011.05.034 · Cited by 270
A Wavelet‐Based Adaptive Pole Assignment Method for Structural Control
Amini, F., & Samani, M. Z. (2014) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12072 · Cited by 70
“…three decades (Wang et al., 1983; Saleh and Adeli, 1997; Kim and Adeli, 2005b; Amini and Karagah, 2006; Yuen et al., 2007; Lu et al., 2009; Cruz and Salgado, 2009; Aldemir, 2010; Lei et al., 2012; Garcı́a-Palencia and Santini-Bell, 2013; Lozano et al., 2013; Nigdeli and Boduroğlu, 2013; Mosa et…”
BackgroundA Test Method for Damage Diagnosis of Suspension Bridge Suspender Cables
An, Y., Spencer, B. F., & Ou, J. (2015) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12144 · Cited by 66
“Many catastrophic events due to the failure, deterioration, or damage accumulation of bridge structures have resulted in heavy casualties and substantial economic loss (Jafarkhani and Masri, 2011; Cruz and Salgado, 2008).”
Background
Metadata
- Authors
- Cruz, P. J. S., & Salgado, R.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2008-11-19
- Volume
- 24
- Issue
- 1
- Pages
- 62-79
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W2048385740
- Cited by
- 140
- References
- 1
- FWCI
- 30.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.