Fractal Dimension-Based Damage Detection Method for Beams with a Uniform Cross-Section: FD-based damage detection method for beams
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
For civil structures, damage usually occurs in localized areas. As fractal dimension (FD) analysis can provide insight to local complexity in geometry, a damage detection approach based on Katz's estimation of the FD measure of displacement mode shape for homogeneous, uniform cross-sectional beam structures is proposed in this study. An FD-based index for damage localization (FDIDL) is developed utilizing the difference of angles of sliding windows between two successive points, which is expressed in FD. To improve robustness against noise, FDIDL is calculated using multisliding windows. The influence of the spatial sampling interval length and the number of 2-sampling sliding windows on sensitivity to damage and robustness against noise is investigated. The relationship between the angle expressed in FD and the modal strain energy is established and thereby an FD-based index for the estimation of damage extent (FDIDE) is presented. The two damage indices are applied to a simply supported beam to detect the simulated damage in the beam. The results indicate that the proposed FDIDL can locate the single or multiple damages, and FDIDE can reliably quantify the damage extent. The optimal spatial sampling interval and the number of sliding windows are investigated. Furthermore, the simulation with measurement noise is carried out to demonstrate the effectiveness and robustness of the two defined FD-based damage indices. Finally, experiments are conducted on simply supported steel beams damaged at different locations. It is demonstrated that the proposed approach can locate the damages to a satisfactory precision.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Long term vibration monitoring of an RC slab: Temperature and humidity effect
Xia, Y., Hao, H., Zanardo, G., & Deeks, A. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.09.001 · Cited by 331 · cited 1×
“The temperature effect (Xia et al., 2006; Xu and Wu, 2007) and effect of temperature and wind speed (Li et al., 2009) on modal identification and damage detection are investigated.”
BackgroundModal identification of bridges under varying environmental conditions: Temperature and wind effects
Li, H., Li, S., Ou, J., & Li, H. (2009) · Structural Control and Health Monitoring · doi:10.1002/stc.319 · Cited by 168 · cited 1×
“The temperature effect (Xia et al., 2006; Xu and Wu, 2007) and effect of temperature and wind speed (Li et al., 2009) on modal identification and damage detection are investigated.”
BackgroundSelf-citation
Cited by
Hou, R., & Xia, Y. (2021) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2020.115741 · Cited by 674
Vibration-based damage detection techniques used for health monitoring of structures: a review
Das, S., Saha, P., & Patro, S. K. (2016) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-016-0168-5 · Cited by 433
A novel machine learning‐based algorithm to detect damage in high‐rise building structures
Rafiei, M. H., & Adeli, H. (2017) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.1400 · Cited by 346
3D displacement measurement model for health monitoring of structures using a motion capture system
Park, S. W., Park, H. S., Kim, J. H., & Adeli, H. (2015) · Measurement · doi:10.1016/j.measurement.2014.09.063 · Cited by 300
Damage identification techniques via modal curvature analysis: Overview and comparison
Dessi, D., & Camerlengo, G. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.05.031 · Cited by 193
Metadata
- Authors
- Li, H., Huang, Y., Ou, J., & Bao, Y.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2011-02-15
- Volume
- 26
- Issue
- 3
- Pages
- 190-206
- ISSN
- 1093-9687 (ISSN-L)
- OpenAlex
- W1578001056
- Cited by
- 82
- References
- 2
- FWCI
- 27.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fractal Dimension-Based Damage Detection Method for Beams with a Uniform Cross-Section: FD-based damage detection method for beams. https://app.cochat.ai/papers/10.1111/j.1467-8667.2010.00686.x
- The paper
- Li, H., Huang, Y., Ou, J., & Bao, Y. (2011). Fractal Dimension-Based Damage Detection Method for Beams with a Uniform Cross-Section: FD-based damage detection method for beams. Computer-Aided Civil and Infrastructure Engineering. https://doi.org/10.1111/j.1467-8667.2010.00686.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.