The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
An Unmanned Aerial Vehicle‐Based Imaging System for 3D Measurement of Unpaved Road Surface Distresses 1
Open accessAbstract
Abstract: Road condition data are important in transportation management systems. Over the last decades, significant progress has been made and new approaches have been proposed for efficient collection of pavement condition data. However, the assessment of unpaved road conditions has been rarely addressed in transportation research. Unpaved roads constitute approximately 40% of the U.S. road network, and are the lifeline in rural areas. Thus, it is important for timely identification and rectification of deformation on such roads. This article introduces an innovative Unmanned Aerial Vehicle (UAV)‐based digital imaging system focusing on efficient collection of surface condition data over rural roads. In contrast to other approaches, aerial assessment is proposed by exploring aerial imagery acquired from an unpiloted platform to derive a three‐dimensional (3D) surface model over a road distress area for distress measurement. The system consists of a low‐cost model helicopter equipped with a digital camera, a Global Positioning System (GPS) receiver and an Inertial Navigation System (INS), and a geomagnetic sensor. A set of image processing algorithms has been developed for precise orientation of the acquired images, and generation of 3D road surface models and orthoimages, which allows for accurate measurement of the size and the dimension of the road surface distresses. The developed system has been tested over several test sites with roads of various surface distresses. The experiments show that the system is capable for providing 3D information of surface distresses for road condition assessment. Experiment results demonstrate that the system is very promising and provides high accuracy and reliable results. Evaluation of the system using 2D and 3D models with known dimensions shows that subcentimeter measurement accuracy is readily achieved. The comparison of the derived 3D information with the onsite manual measurements of the road distresses reveals differences of 0.50 cm, demonstrating the potential of the presented system for future practice .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Cited by
Mobile 3D mapping for surveying earthwork projects using an Unmanned Aerial Vehicle (UAV) system
Siebert, S., & Teizer, J. (2014) · Automation in Construction · doi:10.1016/j.autcon.2014.01.004 · Cited by 859
Deep Transfer Learning for Image‐Based Structural Damage Recognition
Gao, Y., & Mosalam, K. M. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12363 · Cited by 766
A literature review of next-generation smart sensing technology in structural health monitoring
Sony, S., Laventure, S., & Sadhu, A. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2321 · Cited by 606
Ham, Y., Han, K. K., Lin, J. J., & Golparvar-Fard, M. (2016) · Visualization in Engineering · doi:10.1186/s40327-015-0029-z · Cited by 503
Outay, F., Mengash, H. A., & Adnan, M. (2020) · Transportation Research Part A: Policy and Practice · doi:10.1016/j.tra.2020.09.018 · Cited by 496
Metadata
- Authors
- Zhang, C., & Elaksher, A.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2011-07-21
- Volume
- 27
- Issue
- 2
- Pages
- 118-129
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W1485843859
- Cited by
- 210
- References
- 1
- FWCI
- 13.87
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Unmanned Aerial Vehicle‐Based Imaging System for 3D Measurement of Unpaved Road Surface Distresses 1. https://app.cochat.ai/papers/10.1111/j.1467-8667.2011.00727.x
- The paper
- Zhang, C., & Elaksher, A. (2012). An Unmanned Aerial Vehicle‐Based Imaging System for 3D Measurement of Unpaved Road Surface Distresses 1. Computer-Aided Civil and Infrastructure Engineering. https://doi.org/10.1111/j.1467-8667.2011.00727.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.