The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of Monolithic Silica Aerogel of Low Thermal Conductivity by Ambient Pressure Drying
Abstract
Monolithic silica aerogels with thermal conductivity as low as 0.036 W·(m·K) −1 and porosity as high as 97% were successfully prepared by ambient pressure drying through a multiple modification approach. This approach may replace the more costly and dangerous operation of supercritical drying. The tetraethoxysilane (TEOS)‐derived wet gel was made hydrophobic with multiple treatments of trimethylchlorosilane and dried under ambient pressure. The multiple treatments were found to be necessary to achieve sufficient modification of the wet gel for reduction in drying‐induced surface tension force to maintain product integrity and high porosity. Comparisons in nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy for surface bonding and contact angle measurement for hydrophobicity between the no, single, and multiple surface modification (MSM) samples were conducted to reveal the difference in the extent of the resulting surface modification. In conclusion, the MSM procedure reduced the volume shrinkage, increased the monolithicity and porosity, and lowered the thermal conductivity of the resulting aerogels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Cited by
Wei, T., Chen, C., Chien, H., Lu, S., & Hu, C. (2010) · Advanced Materials · doi:10.1002/adma.200902175 · Cited by 1,191
Self-citationHollow‐Structured Materials for Thermal Insulation
Hu, F., Wu, S., & Sun, Y. (2019) · Advanced Materials · doi:10.1002/adma.201801001 · Cited by 454
Linhares, T., Pessoa de Amorim, M. T., & Durães, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04811a · Cited by 366
Ultralight, scalable, and high-temperature–resilient ceramic nanofiber sponges
Wang, H., Zhang, X., Wang, N., Li, Y., Feng, X., Huang, Y., Zhao, C., Liu, Z., Fang, M., Ou, G., et al. (2017) · Science Advances · doi:10.1126/sciadv.1603170 · Cited by 332
Cobalt Oxide Aerogels of Ideal Supercapacitive Properties Prepared with an Epoxide Synthetic Route
Wei, T.-Y., Chen, C.-H., Chang, K.-H., Lu, S.-Y., & Hu, C.-C. (2009) · Chemistry of Materials · doi:10.1021/cm9007365 · Cited by 299
Self-citation
Metadata
- Authors
- Wei, T., Chang, T., Lu, S., & Chang, Y.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2007-07
- Volume
- 90
- Issue
- 7
- Pages
- 2003-2007
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1972562261
- Cited by
- 199
- References
- 1
- FWCI
- 2.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of Monolithic Silica Aerogel of Low Thermal Conductivity by Ambient Pressure Drying. https://app.cochat.ai/papers/10.1111/j.1551-2916.2007.01671.x
- The paper
- Wei, T., Chang, T., Lu, S., & Chang, Y. (2007). Preparation of Monolithic Silica Aerogel of Low Thermal Conductivity by Ambient Pressure Drying. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.2007.01671.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.