The DOI matches its Crossref record.
Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites
Abstract
Different monomer structures lead to different physical and mechanical properties for both the monomers and the polymers. The objective of this study was to determine the influence of the bisphenylglycidyl dimethacrylate (BisGMA) concentration (33, 50 or 66 mol%) and the co‐monomer content [triethylene glycol dimethacrylate (TEGDMA), ethoxylated bisphenol‐A dimethacrylate (BisEMA), or both in equal parts] on viscosity (η), degree of conversion (DC), and flexural strength (FS). η was measured using a viscometer, DC was obtained by Fourier transfer Raman (FT‐Raman) spectroscopy, and FS was determined by three‐point bending. At 50 and 66% BisGMA, increases in η were observed following the partial and total substitution of TEGDMA by BisEMA. For 33% BisGMA, η increased significantly only when no TEGDMA was present. The DC was influenced by BisGMA content and co‐monomer type. Mixtures containing 66% BisGMA showed a lower DC compared with mixtures containing other concentrations of BisGMA. The BisEMA mixtures had a lower DC compared with the TEGDMA mixtures. The FS was influenced by co‐monomer content only. BisEMA mixtures presented a statistically lower FS, followed by TEGDMA + BisEMA mixtures, and then by TEGDMA mixtures. Partial or total replacement of TEGDMA by BisEMA increased η, which was associated with the observed decreases in DC and FS. Although the BisGMA content influenced the DC, it did not affect the FS results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advances and Developments in Composite Dental Restorative Materials
Cramer, N. B., Stansbury, J. W., & Bowman, C. N. (2011) · Journal of Dental Research · doi:10.1177/0022034510381263 · Cited by 716
Self-citationAntibacterial quaternary ammonium compounds in dental materials: A systematic review
Makvandi, P., Jamaledin, R., Jabbari, M., Nikfarjam, N., & Borzacchiello, A. (2018) · Dental Materials · doi:10.1016/j.dental.2018.03.014 · Cited by 333
Delaviz, Y., Finer, Y., & Santerre, J. P. (2014) · Dental Materials · doi:10.1016/j.dental.2013.08.201 · Cited by 292
Antonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287
Huang, Q.-T., He, J.-W., Lin, Z.-M., Liu, F., Lassila, L. V. J., & Vallittu, P. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.10.028 · Cited by 43
Metadata
- Authors
- Gonçalves, F., Kawano, Y., Pfeifer, C., Stansbury, J. W., & Braga, R. R.
- Venue
- European Journal of Oral Sciences
- Publisher
- Wiley
- Published
- 2009-07-14
- Volume
- 117
- Issue
- 4
- Pages
- 442-446
- ISSN
- 0029-845X (ISSN-L)
- 0909-8836
- 1600-0722
- OpenAlex
- W2093597537
- Cited by
- 215
- References
- 0
- FWCI
- 8.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites. https://app.cochat.ai/papers/10.1111/j.1600-0722.2009.00636.x
- The paper
- Gonçalves, F., Kawano, Y., Pfeifer, C., Stansbury, J. W., & Braga, R. R. (2009). Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites. European Journal of Oral Sciences. https://doi.org/10.1111/j.1600-0722.2009.00636.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.